AlphaCom XE - Zenitel

More documents

Recommendations

Info

the database is identical to the exchange tables in NVRAM.LL●●Do NOT do a SendAll to an exchange in normal operation!Perform an exchange reset after SendAll.Get all data from the exchange to the PC.●●●●The data can be stored in the current database or in a new autoloadeddatabase.The configuration may be changed afterwards.Read data from the exchange NVRAM and store it in a PC file.●●This file can not be changed by AlphaPro as it is just a backup.Send data from a PC backup file into the NVRAM in the exchange.●●●●The NVRAM version that created the backup must be identical to theNVRAM version in the exchange.--If they are different, trust the database information and do aSendAll.Always do a reset of the exchange after Restore.Restart the exchange without changing the programming.●●The exchange will halt and all activities will be affected.Set the exchange clock.Modify the node number in the exchange.●●●●If the node number in the exchange is not the same as the nodenumber in the AlphaPro database, the login will fail. This commandallows you to modify the node number in the exchange.After Autoload, the exchange will have node no. 1. In a network ofexchanges (AlphaNet), each exchange must have its unique number.4.6 AlphaPro Menu StructureExchange& SystemDirectory &FeaturesUsers &StationsGroupsAudioprogramsPocketpagersSimplexConferancesOpen DuplexConferancesClass ofServiceReportsAlphaWebConnectionCommunicationUse the menus in AlphaPro to change the default system setup. Themenu bar at the top of the screen has 12 main menus accessed byclicking on its icon. Each main menu will have one or more selectabletabs or submenus.AlphaPro may be run without being connected to AlphaCom (off-line),and all changes can be saved to the PC and copied to the system lateron.It is good practice to start the programming in the Exchange & Systemmenu and continue rightwards on the menu bar.The menu structure for AlphaPro Professional is shown in the followingfigures.L L The menu structure in this section is based on AlphaPro 11.Other versions may differ slightly.30 AlphaCom XE - Installation, Configuration & OperationA100K10805
Exchange& SystemDirectoryNumbersExchange informationPC settingsDirectorynumbersDisplay textSystemUDP textEventactionsRemoteControlSerialportsBoardsExternaldevicesNetAudioNetRoutingRemoteControlPingFeaturedescriptionCoSrestrictionsGeneralCalls andoptionsLogs anderrorsTimersFirealarmVoIPInputsFaultsHide info inidleVisibilityNodeClusterNodeStation / UserGroupsGeneralUserpreferencesStationtypeUsersAutomaticsearchLinemonitoringUserdefinedGongtonesGeneralMembersGeneralMembersNumberDisplaytextStationtypeVolumeGroupGroupPagerEventactionsDAKprogrammingExcludedfromgroupPhoneNameNumberTextAccesslevelPriorityGongtypeNameAccesslevelPriorityMissingmembersAudioProgramsPocketPagersAlphaWebConnectionAudio programsettingsAudio programsGeneralsettingsPagersettingsPocket PagersGeneralsettingsNameSequencesNumberNameTimingsCommunicationDriverTypeReceivernumberSimplexConferencesOpen DuplexConferencesClass ofServiceReportsNumberDescriptionDefaultmemberDefaultspeakerTalk priorityNumberDescriptionMasterSetuppriorityCoSNumberDescriptionValiedfeaturesUsersGroupsNetAudioGroupMembersNetRoutingGlobalGroupsA100K10805AlphaCom XE - Installation, Configuration & Operation31
Page 1: AlphaCom XEInstallation, Configurat
Page 11 and 12: ●●●●The optional program co
Page 13 and 14: Hot-PlugAMC board statusSyncronisat
Page 15 and 16: 24 V48 VLine feedvoltage600 OhmComp
Page 17 and 18: 2.3 Performing a Cold StartA cold s
Page 19 and 20: STANDARD MESSAGES (VOICE/DISPLAY)AB
Page 21 and 22: MLH/CRM STATIONS ONLYCall request 6
Page 23 and 24: ●●The user will be prompted for
Page 25 and 26: LL●●Click Save to save the valu
Page 27 and 28: 4.1.3 PC requirements●●●●
Page 29: Exchange● ● In the main window,
Page 33 and 34: --The text should normally be the s
Page 35 and 36: AlphaCom XE7AlphaCom XE7AlphaCom XE
Page 37 and 38: Configure primary route●●●●
Page 39 and 40: Stations in these nodes can be give
Page 41 and 42: 7 Multi-Module Network7.1 OverviewI
Page 43 and 44: AlphaCom XE7Alp ha Co m XE78 Extern
Page 45 and 46: 8.4.3 Create Prefix numberThe direc
Page 47 and 48: 9 Audio MessagingThe Audio Messagin
Page 49 and 50: The ASVP board has the same set of
Page 51 and 52: 9.2.2 Record message from a station
Page 53 and 54: --9101: Recall to global group 1 (f
Page 55 and 56: 9.4.1 ConfigurationThe default dire
Page 57 and 58: 10 System Monitoring10.1 System Log
Page 59 and 60: View log●●●●●●●●Log
Page 61 and 62: 11 Upgrade & BackupIt is necessary
Page 63 and 64: AC- DC-GND GND12.2 Physical Numbers
Page 65 and 66: S200 settingsThe switch S200 determ
Page 67 and 68: 12.5.1 RIO controller unit connecti

AlphaCom XE - Zenitel

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?