ANNEX I Schedule of Brunei Darussalam Headnote ... - SICE

Annex I: New Zealand's Tariff ScheduleCodeDescriptionBaseEnd2006 2007 2008 2009 2010 2011 2012 2013 2014 2015Ratedate7213.91.10 -- Of cross-section in the shape of "flattened circles" or "modified rectangles" free free 20067213.91.90 -- Other 5 5 5 5 5 free 20107213.99 -- Other:7213.99.10 -- Of cross-section in the shape of "flattened circles" or "modified rectangles" free free 20067213.99.90 -- Other 5 5 5 5 5 free 201072.14 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but includingthose twisted after rolling:7214.10.00 - Forged: 5 5 5 5 5 free 20107214.20 - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling:7214.20.10 -- Of cross-section in the shape of "flattened circles" or "modified rectangles" free free 20067214.20.90 -- Other 5 5 5 5 5 free 20107214.30 - Of free-cutting steel:7214.30.10 -- Of cross-section in the shape of "flattened circles" or "modified rectangles" free free 20067214.30.90 -- Other 5 5 5 5 5 free 2010- Other:7214.91.00 -- Of rectangular (other than square) cross-section 5 5 5 5 5 free 20107214.99 -- Other:7214.99.10 -- Of cross-section in the shape of "flattened circles" or "modified rectangles" free free 20067214.99.90 -- Other 5 5 5 5 5 free 201072.15 Other bars and rods of iron or non-alloy steel:7215.10.00 - Of free-cutting steel, not further worked than cold-formed or cold-finished 5 5 5 5 5 free 20107215.50 - Other, not further worked than cold-formed or cold-finished:7215.50.10 -- Of cross-section in the shape of "flattened circles" or "modified rectangles" 5 5 5 5 5 free 2010-- Other:7215.50.20 --- Containing by weight less than 0.6 % of carbon 5 5 5 5 5 free 2010--- Containing by weight 0.6 % or more of carbon:7215.50.30 ---- Straightened wire not exceeding 13 mm in diameter 6.5 5 5 5 5 free 20107215.50.90 ---- Other 6.5 6.5 6.5 5 5 free 20107215.90.00 - Other 5 5 5 5 5 free 201072.16 Angles, shapes and sections of iron or non-alloy steel:7216.10 - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:7216.10.01 -- U sections 76 mm x 38 mm x 6.7 kg/m 2 6.5 6.5 6.5 5 5 free 20107216.10.09 -- Other free free 2006- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:7216.21 -- L sections:7216.21.01 --- Equal angles 5 5 5 5 5 free 20107216.21.09 --- Other free free 20067216.22.00 -- T sections free free 2006- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more:7216.31 -- U sections:7216.31.01 --- 102 mm x 51 mm x 10.4 kg/m 2 5 5 5 5 5 free 20107216.31.09 --- Other free free 20067216.32.00 -- I sections free free 20067216.33.00 -- H sections free free 20067216.40 - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:7216.40.01 -- Equal angled L sections, 80 mm x 80 mm by 5 mm to 13 mm in thickness 5 5 5 5 5 free 20107216.40.09 -- Other free free 20067216.50.00 - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded free free 2006- Angles, shapes and sections, not further worked than cold-formed or cold-finished:7216.61.00 -- Obtained from flat-rolled products 5 5 5 5 5 free 20107216.69.00 -- Other 5 5 5 5 5 free 2010- Other:7216.91.00 -- Cold-formed or cold-finished from flat-rolled products: 5 5 5 5 5 free 20101-NZ-150