apple-pascal-1.3-manual

Two 51/4-lnch DrivesOne 51/4-lnch DriveYou will normally place your system disk in the startup drive andAPPLE3: in the other drive to Execute APPLE3:FORMATTER. When theutility's first prompt appears on the screen, you can remove APPLE3:from its drive and put in the first disk to be formatted.You can start the disk formatting utility by ExecutingAPPLE3:FORMATTER with APPLE3: in the drive. When the utility's firstprompt appears, you can remove APPLE3: from the drive and put in thefirst disk to be formatted. Do not remove the disk being formatted untilyou are again asked FORMAT WH 1 CH DI SK?. Put the system disk backin the drive before you quit the Formatter.Using the FormatterFrom the Command level, with the disk APPLE3: in any available drive,type x for Execute. When you are askedExecute what file C to exit) ?respond by typingAPPLE3:FORMATTERApple Pascal Disk Formatter Program [1.31The .CODE suffix is added automatically if you don't type it. The systemthen executes FORMATTER.CODE, and displays the following message:Format which volume#? C4, 5, 9 .. 12, to exit) ==>You may now remove the APPLE3: disk from its drive, if you wish. Placethe new or used disk that you wish to format in any available drive. Thentype the volume number for that disk drive. For example, if you put yournew disk in #5:, you should respond by typing 5 and pressing RETURN.First, the program checks the disk to be sure you are not accidentallyreform'htting (and thereby erasing) a disk previously formatted by the ApplePascal system. If you forget and leave APPLE3: in the specified drive, forexample, you will be warned by the questionDestroy directory of APPLE3 ? CY/H)If you type H for No, you will again be askedFormat which volume#? C4, 5, 9 .. 12, to exit) ==>Formatting New DisksII-231