SK200-UM-251 - Graphtec

3. PREPARING TO OPERATE THE SCANNER3.2 Turning the Power On and OffThe LED (blue) on the [POWER] button changes as follows to indicate the scanner’s power supply status.• Unlit: The scanner is turned off.• Lit: Lights when the scanner is turned on and remains lit while it is operating normally.• Flashing: Flashes when the scanner is in power-saving mode.Turning the Power OnPress the [POWER] button on the scanner’s control panel.When the scanner is in the power-on status, the [POWER] button lights blue.ONTurning the Power OffPress the [POWER] button on the scanner’s control panel.When the scanner is in the power-off status, the [POWER] button LED is extinguished.OFFCheckpointAfter the scanner has been turned off, wait at least five seconds before turning it on again.Notes on the power-saving modeThe scanner automatically switches to power-saving mode (the blue LED on the power button flashes) afterapproximately 12 minutes have elapsed without a document being loaded in the scanner. To return thescanner to normal status (Local status), press either the [STOP] or the [EJECT] key.To cancel thepower-saving modeSK200-UM-251-9370 3-2