SK200-UM-251 - Graphtec

7. LIST OF JIGS AND TOOLS7. LIST OF JIGS AND TOOLS7.1 JigsJigs Adjustments RemarksSK200-09 firmware •Downloading system program Firmware (SK200SP.X)Scanning Master 21+(Ver. 6.40 or later)•Downloading system program•Shading (white correction)Software supplied with the scanner(Scanning Master 21+)•Adjusting feed distance•Aligning sensor images•Adjusting offset•Color correctionCalibration sheet •Shading (white correction) Standard accessory1050 mm x 200 mmColor correction sheet •Color correction Standard accessory42-inch adjustment test chart •Adjusting feed distance•Adjusting offset•Aligning sensor imagesRecord measured values between a andc, b and d, a and b, c and d, a and d, andb and c.Shim 0.2 mm•Roller gap adjustment (Between feedShim 0.3 mmroller and contact glass plate)Mylar sheet #300 • Confirmation of the grip pressure Thickness 0.075 mm7.2 ToolsTools Usage RemarksScrewdriverAllen wrench (2 mm to 4 mm)Disassembly, reassembly, and otheroperationsLarge, medium, and small flat bladescrewdrivers and Phillips screwdriversNeedle-nose pliersPush/Pull gauge 5 kgAdjusting belt tensionMultimeterChecking voltage level7.3 OtherItem Usage RemarksWater-diluted neutral detergent or Cleaningabsolute ethanol wiper (cloth)PCUSB cableUsed to determine whether the problemis caused by the scanner or otherequipment.SK200-UM-251-9370 7-1