SK200-UM-251 - Graphtec

More documents

Recommendations

Info

5. DAILY MAINTENANCE5.6 Removing a Jammed DocumentIf a document becomes jammed in the scanner during scanning or another operation, follow the proceduredescribed below to remove the jammed document.(1) Turn off the scanner.(2) Open the top cover as described in Section 5.1 “Opening and Closing the Top Cover”.(3) If the document is jammed at the front, remove the document from the inside by pulling it forward.(4) If the document is jammed at the rear, remove the document by pulling it out along the rear guides.Rear guides(5) Close the top cover as described in Section 5.1, “Opening and Closing the Top Cover”.Caution• Take care not to get your fingers caught in the top cover.• When removing a jammed document, pull on it gently to prevent damage to the document.SK200-UM-251-9370 5-6
5. DAILY MAINTENANCE5.7 Scanner CalibrationCalibrate the scanner if scanning quality is observed to deteriorate, with scanned results such as thosedescribed below• The scanned image is distorted• Areas of uneven color appear in the scanned image• Other unsatisfactory results (but excluding problems related to media quality, such as folds, creases, orpaper curl)Preparation and checksRecommended usage environment• Monitor: 1024 x 768 pixels, High Color or better resolutionCheckpointA low-resolution monitor will make it difficult to discern any problem areas.Launching the Scanner Adjustment Program from Scanning Arts SP(1) Connect the scanner to the computer, turn on the scanner, and then turn on the computer.(2) Install the Scanning Arts SP software if it is not already installed.(3) Click the [Start] button on the Windows desktop, then select Programs > Scanning Arts SP > ScannerAdjustment.(4) Click Scanner Adjustment to launch the Scanner Adjustment program.(5) Select the desired adjustment item from the Scanner menu.SK200-UM-251-9370 5-7
Page 2 and 3: HISTORY OF REVISIONSNo. Date issued
Page 7: 1. OVERVIEW1. OVERVIEW1.1 Standard
Page 12: 2. PART NAMES AND FUNCTIONS(10) EJE
Page 15 and 16: 3. CONNECTION AND PREPARATIONS3.1 C
Page 17 and 18: 3. CONNECTION AND PREPARATIONSR3.3
Page 21: 4. INSTALLING THE SOFTWARE4.2 Insta
Page 24 and 25: 4. INSTALLING THE SOFTWARE4.4 Check
Page 26: 5. DAILY MAINTENANCE5.2 Cleaning th
Page 29: 5. DAILY MAINTENANCE5.5 Cleaning th
Page 33 and 34: 5. DAILY MAINTENANCECalibrationBefo
Page 35 and 36: 5. DAILY MAINTENANCEColor Correctio
Page 37: 5. DAILY MAINTENANCE(10) The follow
Page 41: 7. LIST OF JIGS AND TOOLS7. LIST OF
Page 44 and 45: 8. DISASSEMBLING AND ADJUSTING THE
Page 56 and 57: 8.13 CIS Sensor Unit AssembliesDeta
Page 78 and 79: 9. ADJUSTMENTS USING THE SOFTWARE(5
Page 80 and 81:
9. ADJUSTMENTS USING THE SOFTWARE9.
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
9. ADJUSTMENTS USING THE SOFTWARE(7
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
9. ADJUSTMENTS USING THE SOFTWARETi
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
10. TROUBLESHOOTINGCause Checkpoint
Page 101 and 102:
12. PARTS LISTS12. PARTS LISTS12.1
Page 103 and 104:
12. PARTS LISTS12.3 Side CoverNo. P
Page 105:
12. PARTS LISTS12.5 Feed SectionNo.
Page 108 and 109:
12. PARTS LISTS12.8 Upper Section 2
Page 110 and 111:
12. PARTS LISTS12.10 Rear CIS Senso
Page 113 and 114:
12341234123412341234321125613513232
Page 115 and 116:
SK200-UM-251-9370 13-313. BLOCK DIA
Page 117 and 118:
SK200-UM-251-9370 13-513. BLOCK DIA
Page 119:
SK200-UM-251-9370 13-713. BLOCK DIA
Page 122 and 123:
SK200-UM-251-9370 13-1013. BLOCK DI
Page 124 and 125:
SK200-UM-251-9370 13-1213. BLOCK DI
Page 126 and 127:
SK200-UM-251-9370 13-1413. BLOCK DI
Page 128 and 129:
SK200-UM-251-9370 13-1613. BLOCK DI
Page 130 and 131:
13.2.2 CIS Controller Board for SK2
Page 132 and 133:
SK200-UM-251-9370 13-2013. BLOCK DI
Page 134 and 135:
13. BLOCK DIAGRAM AND CIRCUIT DIAGR
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
13.2.6 Data Controller Board for SK
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
SK200-UM-251-9370 13-4413. BLOCK DI
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164:
show all

SK200-UM-251 - Graphtec

Create successful ePaper yourself

Delete template?

Save as template?