i agree and wish to proceed with download - Roland Systems Group ...

More documents

Recommendations

Info

DCA groupsUsing the panel to controlDCA groupsYou can use the AUX13-16/MTX layer of the fader module section tocontrol DCA groups from the panel.The user preference AUX/MTX LAYER select button (p. 155)must be set to “4Auxes + 8DCA.”1. In the layer section, press [AUX13-16/MTX] to access theAUX13-16/MTX layer.fig.LayerBtn.epsDCA groups2. Use the faders of fader module 5 (DCA1)–12 (DCA8) toadjust the level of the DCA groups.3. By pressing [SOLO], you can operate the solo settings of allchannels belonging to the corresponding DCA group.4. By pressing [MUTE], you can operate the mute settings ofall channels belonging to the corresponding DCA group.116
Mute groupsAbout mute groupsMute grouping is a function that lets you control the mute status ofmultiple channels belonging to a mute group.A channel can belong to more than one mute group.The MUTE GROUP screen is used to make mute group settings.Assigning a channel to amute groupThe MUTE GROUP ASSIGN popup is used to assign a channel to amute group.Accessing the MUTE GROUP screen1. In the GROUP section, press [MUTE].The MUTE GROUP screen will appear.fig.ScrMUTEGroupGuide.epsYou can also use the GROUP ASSIGN popup of the CHANNELDISPLAY screen to assign a channel to a mute group. Fordetails, refer to “Assigning channels to DCA groups and MUTEgroups” (p. 54).1. In the GROUP section, press [MUTE] to access the MUTEGROUP screen.fig.ScrMUTEGroup.epsAA.MUTE group 1–8 buttonsThese buttons turn mute groups 1–8 on/off. When you turnon a mute group, the channels belonging to that group will bemuted.You can also make the setting for switching MUTE groups on oroff from a USER button (p. 154).2. Move the cursor to the MUTE group button of the desiredmute group, and press [F8 (ASSIGN)].The MUTE GROUP ASSIGN popup will appear.fig.ScrMUTEGroupAssignGuide.epsABMute groupsIn the MUTE GROUP screen, the function buttons perform thefollowing operations.[F1 (MUTE1)] Turns MUTE group 1 on/off.[F2 (MUTE2)] Turns MUTE group 2 on/off.[F3 (MUTE3)] Turns MUTE group 3 on/off.[F4 (MUTE4)] Turns MUTE group 4 on/off.[F6 (MUTEALL OUT)]Mutes all outputs of the M-380 and input/output units.[F7 (NAME EDIT)] Accesses the NAME EDITpopup.[F8 (ASSIGN)] Accesses the MUTE GROUPASSIGN popup.p. 118p. 117A.Target mute group indicationThis indicates the mute group to which the settings in theMUTE GROUP ASSIGN popup will apply.B.Channel select buttonsHere you can select the channels that will be assigned to themute group.Output muting controlled by [F6 (MUTE ALL OUT)] cannot bestored in a scene memory. When the M-380 is started up,muting caused by [F6 (MUTE ALL OUT)] will be turned off.In the MUTE GROUP ASSIGN screen, the function buttonsperform the following operations.117
Page 1 and 2:
Owner’s ManualBefore using this u
Page 3 and 4:
USING THE UNIT SAFELYUsed for instr
Page 5 and 6:
120• Always turn the phantom powe
Page 7 and 8:
IMPORTANT NOTESMemory Backup501b•
Page 9:
IMPORTANT NOTES9
Page 12 and 13:
ContentsContentsScene memory ......
Page 14 and 15:
IntroductionCheck the included item
Page 16 and 17:
IntroductionPlacementAbout the REAC
Page 18 and 19:
IntroductionTurning the power on/of
Page 20 and 21:
IntroductionAbout USB memoryIntrodu
Page 22:
Explanation of the panelsTop panelf
Page 25 and 26:
Explanation of the panelsC. PREAMP
Page 27 and 28:
Explanation of the panels• SENDS
Page 29 and 30:
Explanation of the panels14. MONITO
Page 31 and 32:
Explanation of the panels1. CONSOLE
Page 33 and 34:
Explanation of the panels12. Ground
Page 35 and 36:
Basic operationAccessing a screenWh
Page 37 and 38:
Basic operation3. Sub-display areaT
Page 39 and 40:
Basic operationEditing a nameLibrar
Page 41 and 42:
Basic operationEditing the name of
Page 43 and 44:
Input channel operationsOperations
Page 45 and 46:
Input channel operationsSending the
Page 47 and 48:
Input channel operations3. Filter5.
Page 49 and 50:
Input channel operations• AUX pan
Page 51 and 52:
Input channel operationsSpecifying
Page 53 and 54:
Input channel operations5. Press [F
Page 55 and 56:
AUX channel and MAIN L/R channel op
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66: AUX channel and MAIN L/R channel op
Page 67 and 68: MATRIX channel operationsMATRIX cha
Page 69 and 70: MATRIX channel operations2. Insert
Page 71 and 72: MATRIX channel operationsThe functi
Page 73 and 74: DynamicsGate/expander operationsA g
Page 75 and 76: DynamicsGatefig.PopGateGuide2.epsb.
Page 77 and 78: DynamicsA.OverviewThis shows the ov
Page 79 and 80: Dynamics2. IN meterThis indicates t
Page 81 and 82: Dynamicsfig.ScrCompOverviewGuide2.e
Page 83 and 84: DynamicsAccessing the LIMITER popup
Page 85 and 86: Four-band EQE.FT ATT knobThis adjus
Page 87 and 88: AUX send/MATRIX sendAUX send operat
Page 89 and 90: AUX send/MATRIX sendMATRIX send ope
Page 91 and 92: Input/output patchbayb.Jack indicat
Page 93 and 94: Input/output patchbayIf you attempt
Page 95 and 96: MeteringViewing the channel strip o
Page 97 and 98: MeteringB.SRC (source)This selects
Page 99 and 100: Effects and 31-band GEQFX 1-4 tab
Page 101 and 102: Effects and 31-band GEQB.Output cha
Page 103 and 104: Effects and 31-band GEQfig.ScrFxLib
Page 105 and 106: Effects and 31-band GEQInserting a
Page 107 and 108: Effects and 31-band GEQ8-band param
Page 109 and 110: Effects and 31-band GEQUsing the an
Page 111 and 112: Inserting an external effects devic
Page 113 and 114: Inserting an external effects devic
Page 115: DCA groupsAssigning a channel to aD
Page 119 and 120: Talkback/OscillatorAbout talkback a
Page 121 and 122: Talkback/OscillatorUsing the oscill
Page 123 and 124: Monitor/SoloAccessing the MONITOR s
Page 125 and 126: Scene memoryAbout scene memoryScene
Page 127 and 128: Scene memoryRecalling a scene memor
Page 129 and 130: Scene memoryEditing the scene listT
Page 131 and 132: Scene memoryThe Global Scope functi
Page 133 and 134: Scene memory6. Press [F8 (STORE)].f
Page 135 and 136: LCR SYSTEMLCR SYSTEM settingsThe LC
Page 137 and 138: LCR SYSTEM4. Use the AUX select but
Page 139 and 140: LCR SYSTEM2. Centr (center)This spe
Page 141 and 142: USB memory recorderAbout the USB me
Page 143 and 144: USB memory recorderSpecifying the i
Page 145 and 146: USB memory recorderRenaming a WAV f
Page 147 and 148: User settingsAccessing the USER scr
Page 149 and 150: User settingsSaving the current use
Page 151 and 152: User settingsLimiting the range ofp
Page 153 and 154: User settings[F1 (LAYER 1/2)] Acces
Page 155 and 156: User settingsEditing other user pre
Page 157 and 158: REAC applications and settingsREAC
Page 159 and 160: REAC applications and settingsREAC
Page 161 and 162: REAC applications and settingsBacku
Page 163 and 164: REAC applications and settings5. Us
Page 165 and 166: RemoteThis chapter explains remote
Page 167 and 168:
RemoteV-LINK settingsTo make V-LINK
Page 169 and 170:
RemoteRS-232C settingsThe RS-232C t
Page 171 and 172:
Other settings and functions3. Use
Page 173 and 174:
Other settings and functionsSaving
Page 175 and 176:
Other settings and functions5. Use
Page 177 and 178:
Other settings and functionsFormatt
Page 179 and 180:
Other settings and functionsConsole
Page 181 and 182:
Other settings and functionsSystem
Page 183 and 184:
Other settings and functionsIf the
Page 185 and 186:
Management of the M-48 live persona
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
AppendixError message listMessagexx
Page 211 and 212:
Appendix(p. 171) so that touch sens
Page 213 and 214:
AppendixMain specificationsM-380: M
Page 215 and 216:
AppendixDisplay800 x 480 dots Wide
Page 217 and 218:
Effect typesReverbSt.REVERB (Stereo
Page 219 and 220:
AppendixTypes of soundREVERB+GATEfi
Page 221 and 222:
AppendixLSV (Low Shelving)Boosts/cu
Page 223 and 224:
AppendixLONG DELAYΩig.AlgoLongDela
Page 225 and 226:
AppendixWET POSITIONThe wet positio
Page 227 and 228:
AppendixPitch shiftP.SHIFTER x2 (Pi
Page 229 and 230:
AppendixLO-MID QSteepness of the fr
Page 231 and 232:
AppendixLFD FREQ (LF damp frequency
Page 233 and 234:
AppendixDIRECT Sw (Direct Switch)Sp
Page 235 and 236:
AppendixSBF-325(STEREO FLANGER SBF-
Page 237 and 238:
IndexSymbols+48V ..................
Page 239 and 240:
IndexREAC A port ..................
Page 241 and 242:
Screen indexREAC CONFIG popup (SETU
Page 243 and 244:
Block Diagram (LCR SYSTEM: ON)TO RE
Page 245 and 246:
For EU CountriesApparatus containin
show all

i agree and wish to proceed with download - Roland Systems Group ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?