i agree and wish to proceed with download - Roland Systems Group ...

Input/output patchbayUsing the input patchbay libraryThe input patchbay library lets you store the current input patchbaysettings for later recall.The INPUT PATCHBAY LIBRARY popup is used to perform inputpatchbay library operations.1. Access the PATCHBAY screen.fig.ScrPatchIn1608.epsOutput patchbay operationsEditing the output patching1. Access the PATCHBAY screen.ig.ScrPatchIn1608.eps2. Press [F1 (INPUT)] to access the INPUT tab.2. Press [F2 (OUTPUT)] to access the OUTPUT tab.fig.ScrPatchOut1608.epsInput/output patchbay3. Press [F6 (LIBRARY)] to access the INPUT PATCHBAYLIBRARY popup.fig.ScrInPatLibGuide.epsA.Library data listThis lists the library data.A3. Press [F3 (REAC A)], [F4 (REAC B)], or [F5 (CONSOLE)] toselect the desired location for the output jack.4. Move the cursor to the intersection of the desired channeland jack, and press [ENTER].fig.ScrPatchOutChgConf.epsThe function buttons perform the following operations.[F1 (PRESET)] Displays the recall-only PRESET library.[F2 (USER)] Displays the USER library, which letsyou recall or store data.[F4 (RECALL)] Recalls the library data that is selectedin the list.[F5 (STORE)]* Stores settings to the library data thatis selected in the list.[F6 (LOCK)]* Locks the library data that is selectedin the list.[F7 (NAME EDIT)]* Accesses the NAME EDIT popup forediting the name of the user librarydata that is selected in the list.[F8 (CLOSE)] Closes the popup.If a channel is already patched to the output port, a messagewill ask you to confirm the output patching change.Press [F8 (ASSIGN)] to change the output patching.If you press [F7 (CANCEL)] the output patching change will becancelled.If the “PATCHBAY CHANGE” item in the CONFIRMATIONsection of User Preference (p. 155) is unselected, noconfirmation message will appear in step 4.* Available only for the User library.For details on library operations, refer to “Library operations”(p. 39).92