i agree and wish to proceed with download - Roland Systems Group ...

Input channel operationsOperations using theCHANNEL EDIT sectionMost input channel operations can be performed in the CHANNELEDIT section.Here we will explain input channel operations using the CHANNELEDIT section.fig.ChEditSection.eps2. The selected channel is shown in the channel indication atthe upper center of the screen.fig.ScrSelectedCh.epsIf you’ve pressed [TOUCH SELECT] to turn it on (lit), you canselect a channel by touching its fader.Viewing the parameter valuesThe arrangement of parameters and the color of knobs in theCHANNEL EDIT DISPLAY screen is close to that of the CHANNELEDIT section, making it easy to check the values.1. In the CHANNEL EDIT section, press [CH DISP].The CHANNEL DISPLAY screen will appear.fig.ScrChDisp.epsInput channel operationsEven if you don’t access the CHANNEL DISPLAY screen, thevalue of the currently-operated parameter is shown in the subdisplay area when you operate an dial in the CHANNEL EDITsection.fig.SubDispPrm.epsSelecting the channel to edit1. In the fader module section, press a [SEL] button to selectthe input channel that you want to edit.fig.SELBtn.eps[SEL]Preamp gain adjustmentsUse the PREAMP area of the CHANNEL EDIT section to adjust thepreamp gain.fig.ChEdtPreamp.eps1. Use the GAIN dial to adjust the preamp gain.43