i agree and wish to proceed with download - Roland Systems Group ...

Input channel operationsFilter operationsUse the FILTER area of the CHANNEL EDIT section to operate the filter.fig.ChEdtFilter.epsFour-band EQ operationsUse the EQUALIZER area of the CHANNEL EDIT section to operatethe EQ.fig.ChEdtEQ.epsInput channel operations1. Press [ON] to turn the filter on/off.2. Use the FREQ dial to adjust the frequency of the filter.Gate/expander operationsUse the GATE area of the CHANNEL EDIT section to operate thegate/expander.fig.ChEdtGate.eps1. Holding down [SHIFT] and pressing [DISP] for the GATEarea switches the gate/expander on or off.By pressing [DISP] you can access the GATE/EXPANDER popup,where you can make detailed settings for the gate/expander. Fordetails, refer to “Gate/expander operations” (p. 73) .1. Press [ON] to turn the four-band EQ on/off.2. Use the GAIN knobs to adjust the gain of each frequencyband.3. Use the FREQ knobs to adjust the center frequency of eachband.4. Use the Q knobs to adjust the Q of the LO-MID and HI-MIDbands.Compressor operationsUse the COMP area of the CHANNEL EDIT section to operate thecompressor.fig.ChEdtComp.epsYou can make fine adjustments by holding down [SHIFT] whileyou operate the knob.By pressing [DISP] you can access the EQUALIZER popup,where you can make detailed settings for the four-band EQ. Fordetails, refer to “Four-band EQ operations” (p. 84).1. Holding down [SHIFT] and pressing [DISP] for the COMParea switches the compressor on or off.By pressing [DISP] you can access the COMPRESSOR popup,where you can make detailed settings for the compressor. Fordetails, refer to “Compressor operations” (p. 78).Adjusting the pan of the audiosignal sent to the MAIN L/R busUse the PAN area of the CHANNEL EDIT section to make theseadjustments.fig.ChEdtPan.eps1. Use the PAN knob to adjust the pan.You can make fine adjustments by holding down [SHIFT] whileyou operate the knob.44