i agree and wish to proceed with download - Roland Systems Group ...

RemoteRS-232C settingsThe RS-232C tab of the REMOTE popup is used to make RS-232Csettings.1. In the SETUP section, press [SYSTEM] to access theSYSTEM screen.fig.ScrSystem.epsAlways make sure to switch off the M-380’s power before youchange the setting of the MIDI/RS-232C select switch.B.RS-232C rate select buttonsThese buttons specify the RS-232C communication speed.Choose the setting that matches the speed setting on yourcomputer. Make sure to switch OFF the M-380’s power beforeoperating the MIDI/RS-232C select switch.4. In the MIDI/RS-232C select indication, verify the status ofthe rear panel MIDI/RS-232C select switch.5. Move the cursor to the RS-232C rate select button thatmatches the communication speed of your computer, andpress [ENTER] to select the button.2. Press [F4 (REMOTE)].fig.ScrSysRemote.epsThe REMOTE popup will appear.3. Press [F4 (RS-232C)].fig.ScrSysRS232CGuide.epsABThe RS-232C tab will appear.RemoteA.MIDI/RS-232C selection indicationThis shows the status of the rear panel MIDI/RS-232C selectswitch.The functionality of the selected connector(s) is active.MIDIRS-232CMIDI is selected.RS-232C is selected.169