i agree and wish to proceed with download - Roland Systems Group ...

Explanation of the panelsC. PREAMP areafig.ChEdtPreamp.epsE. GATE areafig.ChEdtGate.eps• GAIN knobThis adjusts the preamp gain of CH1–CH48.This adjusts the attenuator of AUX1–AUX16, MATRIX1–MATRIX8, MAIN L/R and MAIN C.When ATT Ctrl (p. 50) at the CHANNEL DISPLAY screen is on,this always adjusts the attenuator.This control is invalid for the following channels.• Input channels to which you have not patched an input port• Input channels to which you’ve patched a port that has nopreamp gain, such as an internal portInvalid controls go dark.D. FILTER areafig.ChEdtFilter.epsIn this area you can operate the gate/expander that is provided forCH1–CH48.• DISP buttonThis accesses the GATE/EXPANDER popup where you canmake detailed settings. The button will light red while thepopup is shown.You can turn the gate/expander on or off by holding down[SHIFT] and pressing [DISP].These controls are invalid for the following channels.• AUX1–AUX16• MAIN L/R, MAIN C• MATRIX1–MATRIX16Explanation of the panelsF. COMP areafig.ChEdtComp.epsIn this area you can operate the filter that is provided for each inputchannel.• ON buttonThis button turns the filter on/off. It will light if the filter is on.• FREQ knobThis adjusts the frequency of the filter.These controls are invalid for the following channels.• AUX1–AUX16• MAIN L/R, MAIN C• MATRIX1–MATRIX16Invalid controls go dark.In this area you can operate the compressor that is provided onCH1–CH48 and the limiter that is provided on AUX1–AUX16,MAIN L/R and MAIN C.• DISP buttonThis accesses a popup where you can make detailed settings.This will access the COMPRESSOR popup for CH1–CH48, orthe LIMITER popup for AUX1–AUX16, MAIN L/R, MAIN C.The button will light red while the popup is shown.You can turn the compressor or limiter on or off by holdingdown [SHIFT] and pressing [DISP].These controls are invalid for the following channels.• MATRIX1– MATRIX825