i agree and wish to proceed with download - Roland Systems Group ...

MATRIX channel operationsSending to MATRIX frominput channels1. Move the cursor to the MATRIX SOURCE SELECT popupbutton (p. 70) and press [ENTER].The MATRIX SOURCE SELECT popup will appear.ig.ScrMtxSelGuide.epsA B CCopying a mix to anotherMATRIXYou can copy the mix from one MATRIX to another MATRIX. Usethe COPY MATRIX MIX popup to perform this operation.1. Access the CHANNEL DISPLAY screen for the desiredcopy-source MATRIX channel.fig.ScrChDispMtx.epsMATRIX channel operationsA.Current channel selection indicationThis indicates the currently selected channel.B.Target MATRIX indicationThis indicates the MATRIX that is the target of operations inthe MATRIX SOURCE SELECT popup.C.Channel select buttonsThese buttons select the channels that will be mixed to theMATRIX.2. Press [F7 (COPY MIX)] to access the COPY MATRIX MIX popup.fig.ScrMtxCopyGuide.epsABIn the MATRIX SOURCE SELECT popup, the function buttonsperform the following operations.[F1 (CH 1–24)] Displays CH1–CH24 as the channelselect buttons.[F2 (CH 25–48)] Displays CH25–CH48 as the channelselect buttons.[F5 (SELECT NONE)] Cancels the channel selection.[F8 (CLOSE)] Closes the popup.3. Use [F1 (CH 1-24)] or [F2 (CH 25-48)] to access the desiredchannel select buttons.4. Move the cursor to the desired channel select button, andpress [ENTER] to select it.5. Press [F8 (CLOSE)] to close the popup.A.Copy-source channel indicationThis indicates the copy-source MATRIX channel.B.Copy-destination channel select buttonThis selects the copy-destination MATRIX channel.In the COPY MATRIX MIX popup, the function buttonsperform the following operations.[F3 (PASTE)] Executes the copy.[F8 (CLOSE)] Closes the popup.3. Use the copy-destination select button to select the copydestinationMATRIX channel.4. Press [F3 (PASTE)].CopyCHoutonf1.epsIf you decide to cancel your channel selection,press [F6 (SELECT NONE)].A confirmation message will ask you to confirm the copyoperation.5. Press [F8 (PASTE)] to copy the mix to the MATRIX channelyou selected in step 3.If you press [F7 (CANCEL)], the operation will be cancelled.72