i agree and wish to proceed with download - Roland Systems Group ...

MATRIX channel operationsMATRIX channel operationsYou can perform MATRIX channel operations in the following ways.• Operations in the METER tab of the METER screenSelect a MATRIX channel by moving the cursor betweenMATRIX1–MATRIX8. You can use the value dial to operate thefaders.fig.ScrMtxSelMeter.epsOperations using theCHANNEL EDIT sectionYou can use the CHANNEL EDIT section to operate the followingparameters of a MATRIX channel.• ATT• Balance• Send levels from AUX1–AUX16 to the MATRIXfig.ChEditSection.eps• Operations in the USER layerUse the fader modules assigned to MATRIX1–MATRIX8 toselect and operate channels. Before you can do this, you willneed to set the user preference in the USER FADER tab (p. 152)to assign MATRIX1–MATRIX8 to the fader modules.• Operations in the AUX13-16/MTX layerUse fader modules 5–12 to select and operate channels. Beforeyou can do this, you will need to set the user preference (p. 155)so that the AUX/MTX Layer select button will select “4Auxes +8Matrices.”MATRIX channel operationsIf a MATRIX channel is selected, pressing the CHANNEL EDITsection [CH DISP] button will access the CHANNEL DISPLAYscreen for the MATRIX channel.Selecting a channel to operate1. As described in “MATRIX channel operations (p. 67),”select the MATRIX channel that you want to operate.2. The selected channel will appear in the channel displayarea in the upper middle of the screen.fig.ScrSelectedMtx.eps67