i agree and wish to proceed with download - Roland Systems Group ...

REAC applications and settingsRecording to a PC via the SPLIT/BACKUP portYou can use a REAC driver with SONAR DAW software to recordfrom the M-380’s SPLIT/BACKUP port to your computer.For details, refer to the following website.http://www.cakewalk.com/REAC settingsThe REAC CONFIG popup of the SYSTEM screen is used to makeREAC settings.The SETUP tab of the REAC CONFIG popup is used to make REACsettings for the M-380.1. In the SETUP section, press [SYSTEM] to access theSYSTEM screen.fig.ScrSystem.epsDIGITAL INS-1608S-1608PCto Ethernet connectorSLAVESLAVE2. Press [F2 (REAC CONFIG)].The REAC CONFIG popup will appear.3. Press [F1 (SETUP)] to access the SETUP tab.FOH CONSOLEfig.ScrSysReacConf1Guide.epsABfig.REACAES-EBU_2.epsS-4000SSLAVEPCto Ethernet connectorA.REAC SETUP select buttonsThese buttons select REAC settings appropriate for thedesired application.REAC applications and settingsFOH CONSOLEB.Setup indicationThis area shows the content of the REAC SETUP select buttonsat cursor location, and the types of connections.4. Move the cursor to the REAC SETUP select buttons, selectthe desired application, and press [ENTER].You can choose from the following applications.FOHMONITOR/BROADCAST ABACKUP(S-4000S)Use the M-380 as a FOH (Front Of House)console. Normally, you should choosethis setting.Use the M-380 as a monitor console orbroadcast console. The split (distribution)from FOH will be received at REAC A.Connect the S-4000S using backup connections.For details on example connections for various applications,refer to “REAC connection examples” (p. 159).162