i agree and wish to proceed with download - Roland Systems Group ...

Basic operationButton operationsButtons in the screen are used to turn a function on/off, to execute acommand, or to access a screen. To operate a button, move thecursor to the desired button and press [ENTER].Knob operationsfig.Cursor.epsON/OFF buttonsBasic operationfig.BtnOnOff.epsThese are used to turn a parameter or function on/off. The button isshown in gray when off, or in color (e.g., red, yellow, or blue) when on.Popup access buttonsfig.BtnPopup.epsKnobs in the screen can be operated by the knobs of the CHANNELEDIT section or by the value dial. To use the value dial, move thecursor to the desired knob.You can make more detailed settings by holding down [SHIFT]while you operate the knobs or the value dial.These are used to access a related popup.Select buttonsThere are the following two types of select buttons.• Radio buttonsfig.BtnRadio.epsfig.Fader.epsPurple knobs in the screen cannot be edited from theCHANNEL EDIT section.Fader operationsThese are used to select one of multiple mutually exclusive choices.Only the last-selected button will be selected.• Check buttonsfig.BtnSel.epsThese are used when it is possible to select more than one of multiplechoices. You can select more than one of these items if desired.ALL/CLR buttonsfig.BtnAllClr.epsFaders in the screen can be operated by the corresponding fadercontroller or by the value dial. To use the value dial, move the cursorto the desired fader.You can make more detailed settings by holding down [SHIFT]while you operate the value dial.List operationsThese buttons assist you in operating check buttons. Pressing theALL button will select all applicable check buttons. Pressing the CLRbutton will clear all applicable check buttons.fig.List.epsThe selected item in a list is shown highlighted in red. Use the up/down keys or the value dial to select a different item.38