SP60 Series - X-Rite
SP60 Series - X-Rite
SP60 Series - X-Rite
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTRUMENT OPERATION MODESTo access standard name menu:1. Use the Tab keys $@ to highlight Std Name.Edit Standard : 1Std Entry:MeasuredStd Name :Tolerances...Shade Sort Opts...Std Lock :UnlockedDelete This Std...2. Press the Enter key # to access the Edit StandardName menu.NOTE: To quickly remove a name, highlighting CLEAR and press theEnter key #.↓↑Edit Standard NameCLEARoName entry fieldSave & Exit3. Use the Tab keys $@ to highlight the name entry field.4. Use the Tab keys $@ to choose the desired characterlocation (arrows above and below designate the selection).Press the Enter key # to access the alphanumeric editor.5. Press the Enter key # again to quickly page throughgroups of letters, symbols, and numbers.6. Use the Tab keys $@ to highlight the desired character andpress the Enter # key to exit editor.7. Continue with additional character edits.8. When editing is completed, use the Tab keys $@ tohighlight Save & Exit and press the Enter # key.5.1.4 Setting Tolerance LimitsThe tolerance limit is the maximum allowable difference fromthe standard color values that is considered acceptable. Thetolerances are used to test your sample’s acceptability bydisplaying a pass or fail signal, based on the entered limits. Theplus and minus limits can be set equal or individually forL*a*b*, L*C*h°, and L*u*v*. Pass/fail indication appears inQA and Strength modes when set.5-5