SP60 Series - X-Rite

More documents

Recommendations

Info

INSTRUMENT OPERATION MODESDelete This SampleDeletes the current sample from the database.Delete Proj SamplesDeletes all samples attached to the current project.Delete All SamplesDeletes all samples stored in the database.4. Use the Tab keys $@ to highlight the desired tools optionand press the Enter key #.5. Use the Tab keys $@ to highlight Yes and press the Enterkey # to initiate the selected tools option.5.3.9 Viewing the Reflectance GraphThe instrument can display reflectance graphs for the standardand sample at the same time. Reflectance values (actual ordifference) are displayed in 10nm increments, from 400 to 700nanometers. Reference data can also be viewed with specularincluded or excluded.Measurements can be taken with the reflectance graphdisplayed in Analyze and Compare mode.ReflectancecurveNOTE: The reflectance graph is auto scaling and could change whenswitching between SPIN and SPEX components.To view a reflectance graph:1. Use the Tab keys $@ to highlight the reflectance curve.Proj 1: PROJECT AStd 1: STANDARD ASample: #9 9:51L*a*b*ΔL* +0.05D65/10 L* 88.25 Δa* —0.03SPIN a* —4.71 Δb* —0.14. . . ... . ...b*+36.64 ΔE* 0.162. Press the Enter key # to display the reflectance graph.Refl Graph SPIN37.538.25 560Current specular componentCurrent point selectedSample curveStandard curveNOTE: When averaging is used, all measurements must be completedbefore the graph screen can be entered.5-21
CHAPTER FIVE3. Pressing the Enter key # with the specular componenthighlighted toggles between SPIN and SPEX. The curveautomatically adjusts between selections.4. Repeatedly press the Tab Up key $ or Tab Down key @ toview data in 10nm increments, along the reflectancecurve.5. Pressing the Enter key # when a reflectance point isselected toggles the graph between actual sample dataand difference data.Refl Graph38.25 560SPINActual Data37.5Refl GraphSPINDifference Data37.56. Press the Escape key ! to return the display to the maindata screen.5-22
Page 7 and 8:
viStore Samples 4-3Pass/FailAuto St
Page 10:
proven to X-Rite‘s reasonable sat
Page 13:
CHAPTER ONEFeaturesAutomatic Shut-O
Page 17 and 18:
CHAPTER ONEPowerI t DetachableLine
Page 19 and 20:
CHAPTER ONE1-8
Page 21 and 22:
CHAPTER TWO@2.2.1 Tab Down keyAdvan
Page 23 and 24: CHAPTER TWODepending on the mode an
Page 25 and 26: CHAPTER TWO2.4.5 Selecting Color Da
Page 27 and 28: CHAPTER THREE3.2 Positioning the In
Page 29 and 30: CHAPTER THREE3-4
Page 31 and 32: CHAPTER FOUR4.3 Measure OptionsThe
Page 33 and 34: CHAPTER FOURMeasure OptionsStore Sa
Page 35 and 36: CHAPTER FOURTo open the Color Optio
Page 37 and 38: CHAPTER FOUR4. When editing is comp
Page 39 and 40: CHAPTER FOUR5. Use the Tab keys $@
Page 41 and 42: CHAPTER FOUR4-12To open the Databas
Page 43 and 44: CHAPTER FOUR4.5.6 Clear All Jobs (S
Page 45 and 46: CHAPTER FOURconfiguration only affe
Page 47 and 48: CHAPTER FOURAuto XMT Selection1. Us
Page 49 and 50: CHAPTER FOUR5. When editing is comp
Page 51 and 52: CHAPTER FOURNOTE: Highlighting CLEA
Page 53 and 54: CHAPTER FOURSecurity Mode1. Use the
Page 55 and 56: CHAPTER FIVEThe Standard Entry fiel
Page 57 and 58: CHAPTER FIVE3. Use the Tab keys $ @
Page 59 and 60: CHAPTER FIVETolerance Limit TypeTol
Page 61 and 62: CHAPTER FIVE5-8The shade sort range
Page 63 and 64: CHAPTER FIVE2. Press the Enter key
Page 65 and 66: CHAPTER FIVE5.2.2 Assigning Standar
Page 67 and 68: CHAPTER FIVE5.2.4 Locking/Unlocking
Page 69 and 70: CHAPTER FIVE5.3.1 Selecting a Proje
Page 71 and 72: CHAPTER FIVEFailureindication anddi
Page 73: CHAPTER FIVEinstrument is held down
Page 77 and 78: CHAPTER FIVE5.4.1 Strength Measurem
Page 79 and 80: CHAPTER FIVE5.5.1 Opacity Measureme
Page 81 and 82: CHAPTER FIVE5.7 Compare ModeThe Com
Page 83 and 84: CHAPTER FIVE5-30
Page 85 and 86: CHAPTER SIX6.2.2 Cleaning the Optic
Page 87 and 88: CHAPTER SIX6-4
Page 89 and 90: CHAPTER SEVENPollution Degree 2Over
Page 91 and 92: CHAPTER SEVEN7-4
show all

SP60 Series - X-Rite

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?