Panasonic Air Conditioner
Panasonic Air Conditioner
Panasonic Air Conditioner
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8 Operation Instructions<br />
8.1. Wired Remote Control<br />
Name and function of each part<br />
REMOTE<br />
The OFF/ON button cannot be used.<br />
LOCAL<br />
All wired remote control buttons can be used.<br />
Time/time setting display<br />
Check display<br />
Fan speed display<br />
Operation mode selection display<br />
FILTER RESET display<br />
(Appears after the cumulative running time reaches approximately<br />
2,500 hours of operation.)<br />
Temperature setting display (16°C - 31°C)<br />
NOTES<br />
• Ensure that the correct button is pressed as simultaneous pressing of the multiple buttons will not make the setting correct.<br />
• The illustration above is for explanatory purposes only. The appearance will be different during actual operation.<br />
• Do not operate the remote control with wet hands. Otherwise, electric shock or malfunction may occur.<br />
• Do not press the remote control buttons with sharp object as this may damage the remote control.<br />
• Buttons marked with * are not needed for normal operation. If one of these buttons is pressed by mistake, press the same button<br />
once more to cancel the operation.<br />
• When the power resumed after power failure, the unit will restart automatically with all the previous settings preserved by the<br />
memory function. (Auto restart function)<br />
17<br />
<strong>Air</strong>flow direction setting display<br />
OFF/ON button<br />
Used to start and stop the operation.<br />
FAN SPEED button<br />
Used to select the fan speed of high (HI), medium (MED), low<br />
(LO) or auto (AUTO).<br />
MODE button<br />
Used to select the operation of AUTO, FAN, COOL, or DRY.<br />
TEMP (UP/DOWN) buttons<br />
Used to select the desired temperature.<br />
AIR SWING (AUTO/MANUAL) buttons<br />
Used to determined the air swing condition, either auto or<br />
manual.<br />
FILTER RESET button<br />
Press to reset the “FILTER RESET” display after washing the filter.<br />
TEST RUN button*<br />
VENTILATION button*<br />
ECONOMY operation button<br />
Provides Energy saving function<br />
ODOUR WASH button<br />
Provides deodorizing function.<br />
CHECK button<br />
Press this button if the check display is flashing.<br />
TIMER/CLOCK SET buttons<br />
Used to set the timer operation and the current time.<br />
Operation indicator<br />
Lights up when the unit in operation.
Change language