08.12.2012 Views

Panasonic Air Conditioner

Panasonic Air Conditioner

Panasonic Air Conditioner

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

10.7. Wireless remote control installation manual<br />

Wireless Remote Control Installation Manual<br />

• Before installing the wireless remote controller, be sure to thoroughly read the “Notes with regard to safety” section of the installation<br />

manual provided with the indoor unit.<br />

• After installing the wireless remote controller, carry out a test operation to check that the remote controller functions properly, and<br />

also explain the operation and cleaning procedures to the customer in accordance with the details in the instruction manual.<br />

Furthermore, ask the customer to keep this installation manual and the instruction manual in a safe place for later reference.<br />

10.7.1. Accessories supplied with the wireless remote controller<br />

No. Name Q’ty<br />

Cassette Ceiling<br />

1. Wireless Remote Controller 1 1<br />

2. R03 battery 2 2<br />

3. Holder (For securing remote controller) 1 1<br />

4. Holder fixing screw 2 2<br />

5. Receptor unit (For Cassette Type) 1 -<br />

6. Receptor unit (For Ceiling Type) - 1<br />

7. Installation manual 1 1<br />

10.7.2. Points and notes regarding wireless remote controller setting-up location<br />

• The wireless remote controller can be used to operate indoor units at a maximum range of 8 metres from directly facing infront of<br />

the indoor unit.<br />

• If the remote controller is at an angle to the receptor unit, the operation range may become shortened.<br />

• The accessory receptor unit must be attached to the veneer panel.<br />

• The receptor unit for the wireless remote controller should be in a place where it will not be affected by direct light from fluorescent<br />

lights. (Refer to the illustration below.)<br />

(If using an inverter-type fluorescent light, keep the receptor unit at least 1m away from the light, otherwise remote control operation<br />

may not work properly.)<br />

• If installing in a place where a power supply is generating electromagnetic noise, take measures such as installing a noise filter.<br />

• Install at least 3m away from any noise sources, and shield the electric cables using an iron conduit pipe.<br />

• Install at least 1m away from equipment such as TVs and radios. (Otherwise picture distortion or static may occur.)<br />

62

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!