Overdrive Pro 3G/4G Mobile Hotspot user guide - Sprint

● MSID (Mobile Station ID) — Also known as IMSI (International Mobile Station Identity), the MSID is
an identifier of a device on the 3G network.
● NAI (Network Access Identifier) — This is your User ID for accessing the 3G network.
● Roaming Status — This indicates whether you are home or roaming (outside of Sprint coverage).
● PRL Version — The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels and network carrier used by the 3G modem. An
updated PRL may improve your 3G network service.
Tip: You can view the 3G connection status on the “Network Status” LCD information screen. (See “LCD
Information Screens” on page 17.)
Resetting the 3G and 4G Configurations to Default Settings
Note: Reset the configurations only if instructed by a Sprint representative.�
After a configuration reset:�
• You must go through the device setup (page 20) and 3G activation. (The latter starts automatically.)�
• Any changes you’ve made to the settings are lost.
1. Log in to the home page.
2. Click Advanced settings > Device > About.
3. Click Reset Device to Factory Defaults.
4. When prompted, enter the SPC (Service Programming Code). (If you don’t know your SPC,
contact Sprint.)
To be able to establish a data connection after you’ve reset the device to factory defaults, you must
first:
1. Go through the device setup (page 20).
2. Go through 3G activation or, if using 4G, use pay-as-you-go.
96 Settings