Overdrive Pro 3G/4G Mobile Hotspot user guide - Sprint

4. If the device LCD displays “Charging,” “Charged,” or “Powered off,” press and hold the power
button for two seconds.
5. Wait until the device LCD displays “Connect your computer to Wi-Fi network,” followed by the
network name (SSID) and password. This may take several seconds.
6. On your computer, connect to the Wi-Fi network listed on the device LCD. If you don’t know
how to do this, see “How Do I Connect to Wi-Fi?” on page 120. After you’ve connected to the
Wi-Fi network, the device LCD displays “Open any web page to continue setup.”
7. Open your Web browser. The “Welcome to your Overdrive Pro” window opens.
Note: This window displays the administrator password and the address of the device home page. Please
remember this information or write it down in a safe place.
This window provides several options.
● To keep the default settings of the device, click one of the following:
� The Internet (to connect immediately to the Internet)
� My Overdrive Pro’s home page (to view the device status, customize settings). Proceed to
“Activating and Using Your Network Service” on page 24.
● To change security settings, click Set up my Overdrive Pro.
Changing the Password and Settings
During the device setup, you can select Set up my Overdrive Pro to change the following settings:
● Administrator password — This password is used to log in to the home page, where you can
view and customize your device settings. The default password is “password.” Choose
something easy-to-remember (yet not easily guessed by others). If you forget this password,
you’ll need to reset the device to its default settings and go through the device setup (as
described in “Device Setup” on page 20).
Your administrator password must be 1–20 characters long.
Getting Your Device Ready 21
Getting Your Device Ready