Overdrive Pro 3G/4G Mobile Hotspot user guide - Sprint
Overdrive Pro 3G/4G Mobile Hotspot user guide - Sprint
Overdrive Pro 3G/4G Mobile Hotspot user guide - Sprint
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Section 5I<br />
GPS Settings<br />
� Setting the GPS Mode (page 97)<br />
� Setting the GPS Fix Rate (page 98)<br />
� Using Metric Units (page 98)<br />
� Changing Your Mapping Service (page 98)<br />
� Performance Setting (GPS) (page 98)<br />
� Accuracy (page 99)<br />
Basic GPS settings can be changed in the GPS Information and Settings window. (See “GPS<br />
Information and Settings” on page 46.)<br />
Additional settings are available at Advanced settings > WAN > GPS.<br />
Setting the GPS Mode<br />
GPS mode determines whether the location fix is done:<br />
● Once (“one-time”), or<br />
● Periodically (“continuous”) — used, for example, for turn-by-turn (TBT) navigation applications.<br />
To set the GPS mode:<br />
1. Make sure you’re logged in to the home page.<br />
2. Click Advanced settings > WAN > GPS.<br />
3. Select the Enable GPS check box if it is not selected.<br />
4. Select one of the following:<br />
� One-time — A single fix is used. Use this option if you’ll be using your device at the same<br />
location.<br />
Tip: If you want to get a fix immediately, click Get fix now.<br />
� Continuous — Fixes are obtained on a regular basis; also known as auto-tracking. Useful<br />
for turn-by-turn (TBT) navigation applications, such as driving directions.<br />
Settings 97<br />
Settings