Overdrive Pro 3G/4G Mobile Hotspot user guide - Sprint

● Import Router Settings — You can import configuration settings. (See “Importing Settings” on
page 112.)
● Export Router Settings — You can export configuration settings. (See “Exporting Settings” on
page 112.)
● Update Firmware from File — You can upgrade the device firmware from a file. (See “Upgrading
Firmware From a File” on page 63.)
● Standby Timer on Battery and On AC Power — You can enable standby (low power) mode. (See
“Standby (Low Power) Mode” on page 49.)
● TRU-Install — This feature installs the necessary drivers the first time you connect your device to
your Windows or Mac computer through the micro-USB cable. (For information on this feature,
see “TRU-Install” on page 28.)
● Check for Updates and Check for updates now — You can check for updates to your device.
(See “Automatically Checking for Updates” on page 61 and “Manually Checking for Updates”
on page 62.)
Display Panel
From the Display panel of the Device tab, you can configure settings for the device LCD.
To access this panel:
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > Display.
From this window, you can view or adjust these settings:
● Power Button LED — You can enable the power button light on the device. (See “Enabling and
Disabling the Power Button LED” on page 72.)
● LCD Backlight — You can turn the LCD on or off. (See “Turning the LCD On or Off” on page 71.)
● Turn Off Backlight — This setting specifies how soon the LCD goes dormant. (See “Setting the
LCD Timeout” on page 71.)
● Backlight Settings — You can adjust the brightness of the LCD. (See “Setting the LCD
Brightness” on page 71.)
microSD Card Panel
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > microSD Card.
From this window, you can view or adjust these settings, or perform the following actions:
● Status — This field reflects the status of the microSD card slot (for example, the slot is disabled,
or a card is detected).
Settings 77
Settings