HMI software for CNC controls

More documents

Recommendations

Info

4 HMI software for CNC controls Motion Control Information System MCIS DNC – Direct Numeric Control DNC Cell ■ Function • Software for managing and transferring NC programs on a standard PC (workstation) • Connection of up to 16 CNCs or tool setting stations via serial interfaces using DNC IFC Serial • Integration of up to 16 additional CNC machines over an Ethernet network - SINUMERIK control via standard Ethernet network with DNC IFC SINUMERIK - Ethernet-capable CNC machines that can be supplied with NC programs through a network file system (see DNC IFC File System) • Connection of NC programming systems via standard network, e.g., via Ethernet, Novell or token ring • Automatic data import from NC programming system • Shopfloor-oriented NC program archiving structures with DNC Explorer • User management with user-dependent functions such as display, edit, copy, delete, enable NC programs • Program transfer through operator inputs on the DNC Cell PC • Program transfer directly on the CNC operator panel with DNC IFC Dialog • Automatic data archiving of the SINUMERIK control • NC program comparison/machine adaptation between the SINUMERIK control and DNC Cell using DNC Compare • GUI for parameterization of interface parameters • Scalable system configuration from small, local DNC systems up to the factory-wide multi-user system DNC Plant DNC Cell is a solution with a single PC (a workstation). The management functions can only be operated from this PC. Using the DNC IFC Serial interface client (per CNC), up to 16 CNC machines with a serial interface can be connected to DNC Cell. DNC Cell already contains a DNC IFC Serial interface module. Up to 16 further Ethernet-capable CNC machines with DNC IFC SINUMERIK or DNC IFC File System modules can also be integrated. DNC Cell thus permits uniform networking of the most heterogeneous CNC machinery with many different generations and types of CNCs from the production planning stage up to actual production. 4/22 Siemens NC 60 · 2006 ■ Selection and Ordering Data Designation Order No. DNC Cell Software package Languages: English, French, German, Italian, Spanish • Single license without data carrier • Single license with CD-ROM of current software version • Single license with CD-ROM of specific software version • Upgrade with CD-ROM for a specific software version 6FC6000-0BF00-0AB0 6FC6000-0BC00-0AA0 6FC6000-0BC07-7AA0 6FC6000-0BC07-7AE0 Example of "specific software version", e.g.: 1.00: 6FC6000-1BC01-0A..
■ Overview DNC – Direct Numeric Control DNC Cell – DNC IFC SINUMERIK The interface client DNC IFC SINUMERIK is used to connect the SINUMERIK control to DNC Cell or DNC Plant, and provides the machine operator with an operator interface for transfer of NC programs. ■ Function • Summary of the NC data/programs available for the SINUMERIK control in the database of DNC Cell/DNC Plant • Display of management information for the NC program • Display of graphics on the SINUMERIK • Selection and transfer of one or more (multiple selection) NC data/files to the SINUMERIK control by means of operations on the SINUMERIK • Selection and uploading of one or more (multiple selection) NC data/files to the DNC archive DNC Cell/DNC Plant by means of operations on the SINUMERIK • Key switch-dependent functions One DNC IFC SINUMERIK license is required for each SINUMERIK control to be connected. ■ Integration Preconditions: • SINUMERIK 810D powerline/840Di/840D powerline with PCU 50/PCU 70 • SINUMERIK 810D/840D with MMC 103 ■ Selection and Ordering Data Designation Order No. DNC IFC SINUMERIK 6FC6000-0EF00-0AB0 for each SINUMERIK 810D/840Di/840D Basic product, license only HMI software for CNC controls Motion Control Information System MCIS DNC – Direct Numeric Control DNC Cell – DNC IFC Serial ■ Overview The interface client DNC IFC Serial is used to connect CNC machines with a serial interface to DNC Cell or DNC Plant. ■ Function • Software module for connection of serial CNC machines (punched-tape format) to DNC Cell/DNC Plant (per serial CNC) • Machine connections - DNC Cell: max. 16 to DNC Cell PC - DNC Plant: max. 16 per station PC/DNC Plant PC (direct serial) More than 16 machine connections to the station PC or plant PC are possible through interface converters ("ComServer"). • Program transfer through operation on DNC Cell/DNC Plant PC or on the station PC of DNC Plant (see DNC Plant) • Program transfer directly on the CNC control panel with DNC IFC Dialog (see DNC IFC Dialog) • Reloading mode possible ■ Integration Preconditions: • Control with serial interface without special protocol (punchedtape format) ■ Selection and Ordering Data Designation Order No. DNC IFC Serial 6FC6000-0FF00-0AB0 for each serial CNC Software option • Single license without data carrier Siemens NC 60 · 2006 4/23 4
Page 1 and 2: HMI software for CNC controls 4/2 O
Page 3 and 4: ■ Overview The HMI-Advanced softw
Page 5 and 6: ■ Overview The ManualTurn operato
Page 7 and 8: ■ Selection and Ordering Data Des
Page 11 and 12: ■ Overview Measuring cycles Examp
Page 13 and 14: ■ Overview HMI software for CNC c
Page 15 and 16: HMI software for CNC controls Open
Page 17 and 18: ■ Overview EasyMask is a simple c
Page 19 and 20: ■ Overview Introduction With the
Page 21: ■ Overview DNC Cell supports hand
Page 25 and 26: ■ Overview DNC Compare is a suppl
Page 27 and 28: HMI software for CNC controls Motio
Page 31 and 32: ■ Overview Using the convenient d
Page 33 and 34: ■ Overview TDI Statistic provides
Page 37 and 38: ■ Overview With TDI Machine, tool
Page 41 and 42: ■ Overview MDA Cell is used to co
Page 43 and 44: ■ Overview The MDA IFC Interface
Page 47 and 48: ■ Overview MCIS TPM provides supp
Page 49 and 50: ■ Overview HMI software for CNC c
Page 51 and 52: ■ Overview Remote diagnostics int
Page 55 and 56: HMI software for CNC controls ePS N
Page 57 and 58: ■ Overview The MOBY I contactless
Page 59 and 60: ■ Overview The write/read device
Page 61 and 62: ■ Technical specifications Type C
Page 63 and 64: HMI software for CNC controls Tools
Page 65 and 66: HMI software for CNC controls SINUM
Page 67 and 68: ■ Overview Comara KG Intelligent
Page 69 and 70: ■ Overview TwinCAM 32 CNC program
Page 71 and 72: MARPOSS S.p.A. Measuring, balancing
Page 73 and 74:
■ Overview MPM - Micro Präzision
Page 75 and 76:
■ Overview PROMETEC GmbH PROSIN d
show all

HMI software for CNC controls

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?