HMI software for CNC controls
HMI software for CNC controls
HMI software for CNC controls
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
■ Technical specifications<br />
Type Contactless, inductive RF identification<br />
system <strong>for</strong> industrial<br />
applications<br />
Transmission frequency<br />
13.56 MHz<br />
(energy/data)<br />
Memory capacity • 20 bytes to 64 KB user memory<br />
(r/w)<br />
• 4 bytes fixed code as serial<br />
number (ro)<br />
Memory type EEPROM/FRAM<br />
Write cycles<br />
•EEPROM > 100 000<br />
• FRAM Unlimited<br />
Read cycles Unlimited<br />
Data management Byte-oriented access<br />
Data transfer rate<br />
reader - tag<br />
Read/write distance<br />
(system limit)<br />
SIMATIC RF 300<br />
up to 3 KB/s<br />
(IQ-Sense: 50 bytes/s)<br />
Up to 200 mm (7.87 in)<br />
Operating temperature range<br />
• Write/read device -25 ... +70 °C (-13 ... +167 °F)<br />
• Mobile data storage -40 ... +85 °C (-40 ... +185 °F)<br />
Degree of protection<br />
• Write/read device IP65<br />
• Mobile data storage ≥ IP67<br />
Can be connected to • SIMATIC S7-300<br />
• PROFIBUS DP V1<br />
• PC (not IQ-Sense)<br />
• Other vendors PLC<br />
Special features • High noise immunity<br />
• Compact components<br />
• Comprehensive diagnostic<br />
options<br />
• One reader with IQ-Sense<br />
interface<br />
Approvals • ETS 300330 (Europe)<br />
• FCC Part 15 (USA)<br />
• UL/CSA CE<br />
■ Selection and Ordering Data<br />
Designation Order No.<br />
SIMATIC RF320T 1) 6GT2800-1CA00<br />
SIMATIC RF340T 1) 6GT2800-4BB00<br />
SIMATIC RF310R reader 6GT2801-0AA00<br />
Accessories<br />
IQ-Sense module SM 338 <strong>for</strong> 6ES7338-7XF00-0AB0<br />
S7-300 and ET 200M<br />
CD "RFID Systems Software & 6GT2080-2AA10<br />
Documentation"<br />
FB/FC <strong>for</strong> SIMATIC, 3964R driver<br />
<strong>for</strong> DOS/Windows 95/NT/2000/XP,<br />
C libraries, PC presentation program,<br />
RFID documentation<br />
M12 cable plug<br />
with 5 m (16.41 ft) PUR cable<br />
4 x 0.34 mm2 3RX8000-0CB42-1AF0<br />
, straight connector<br />
<strong>for</strong> SIMATIC RF310R<br />
1) Subject to export regulations AL = N and ECCN = EAR99H.<br />
<strong>HMI</strong> <strong>software</strong> <strong>for</strong> <strong>CNC</strong> <strong>controls</strong> Tools<br />
SIMATIC STEP 7 <strong>for</strong> SINUMERIK hardware<br />
■ Overview<br />
The SIMATIC STEP 7 <strong>software</strong> <strong>for</strong> service functions can be used<br />
to read status and service displays of the CPU via the PLC program<br />
without the need <strong>for</strong> an additional programming device,<br />
and to integrate new modules.<br />
The <strong>software</strong> is designed <strong>for</strong> service functions. The conditions of<br />
the SINUMERIK supply contract apply.<br />
Existing service packs <strong>for</strong> SIMATIC STEP 7 are released separately<br />
<strong>for</strong> STEP 7 on PCU.<br />
■ Integration<br />
SIMATIC STEP 7 can be used on:<br />
• SINUMERIK PCU 50/PCU 70/PCU 50.3<br />
Preconditions:<br />
• Mouse and PC keyboard<br />
• Windows XP SP1 <strong>for</strong> SIMATIC STEP7 V5.3<br />
• Windows XP SP1 or SP1a <strong>for</strong> SIMATIC STEP7 V5.3 SP1<br />
• Windows XP SP1 or SP2 <strong>for</strong> SIMATIC STEP7 V5.3 SP2<br />
■ Selection and Ordering Data<br />
Designation Order No.<br />
SIMATIC STEP 7 <strong>for</strong><br />
SINUMERIK hardware<br />
• Single license<br />
6FC5252-0AY00-0AG1<br />
without data carrier<br />
• Single license with CD-ROM 6FC5252-0AY00-0AG0<br />
of current <strong>software</strong> version<br />
• Single license with CD-ROM 6FC5252-7AY01- 7AG0<br />
of specific <strong>software</strong> version<br />
Example of "specific <strong>software</strong> version", e.g., 5.3:<br />
6FC5252-5....-3...<br />
Siemens NC 60 · 2006<br />
4/61<br />
4