HMI software for CNC controls

HMI software for CNC controls Tools
Siemens NC 60 · 2006
SinuCom
■ Function (continued)
■ Function (continued)
SinuCom NC Trace
The CF card is programmed using standard tools. These tools
The SinuCom NC Trace function is used for the dynamic record- are not included in SinuCom CFS.
ing of CNC, PLC and HMI variables, and of drive signals that are
available via the CNC. These variables can be displayed, printed
out or stored in a file, similar to using an oscillograph or logic
analyzer. The SinuCom NC Trace function provides support in:
Preconditions:
• Windows XP operating system
• SINUMERIK 840D sl
• Fault detection and fault correction
• Machine performance analysis, benchmarking and tuning
• Process performance analysis, benchmarking and tuning
When copying the software, be sure to follow the A&D software
marketing guidelines!
Preconditions:
• Windows XP operating system
• SINUMERIK 810D powerline/840D powerline 6.4.15 and
higher and HMI-Advanced 6.3.15 and higher (variables of the
CNC, PLC, HMI and drive)
• SINUMERIK 840D sl software version 1 and higher and
SinuCom ARC
The SinuCom ARC program simplifies the processing of series
startup files:
• Reading, deleting, inserting and changing series startup files
• Integrated help
Preconditions:
HMI-Advanced software version 7.1 and higher
• Windows ME/NT 4.0/2000/XP operating system
•Mouse
SinuCom PCIN
SinuCom NC SI
The SinuCom PCIN program is used to send and receive CNC
The SinuCom NC SI function is used to automate the Safety user data, such as machine data and part programs, via the se-
Integrated acceptance test, supports the original equipment rial interface between a Siemens PC/PG and a Siemens control.
manufacturer (OEM), and optimizes the process:
It contains:
• Verification of machines in accordance with EU Machinery • Setting up and interrogating V.24 interface
Directive EN954-1 (control category 3)
• Editing archive files
• Testing of safety functions (partly automated) during the • Storing files from directories individually
machine acceptance
• Secure data transmission
• Logging of measured data and test results incl. Trace function • Integrated help
records
• Testing of single/special-purpose machines, machine components
(as a partial test) and series machines as series startup
Preconditions:
• Windows 95/98/ME/NT 4.0/2000/XP operating system
• Shorter startup times since, in the new acceptance mode,
power-on alarms during the acceptance test are acknowledged
by RESET
Secure data transmission is supported by HMI-Advanced
version 6.1.05 or higher.
• User-friendly operation due to controlled execution and the
automatic configuration of the Trace functions
• Unambiguous quality verification for original equipment
manufacturers as well as customers, and for dealings with
government agencies
Startup software for SINAMICS S120/SIMODRIVE 611 digital
The startup software for PCs/programming devices can be used
to optimize first-time starting of drives with
SINAMICS S120/SIMODRIVE 611 digital if HMI-Advanced user
interface software is not available.
Preconditions:
Preconditions:
• Windows XP operating system
• SINUMERIK 840D powerline 6.4.15 or higher and HMI-
Advanced 6.3.15 or higher
• SINUMERIK 840D sl software version 1 or higher and
• Windows XP operating system
■ Selection and Ordering Data
HMI-Advanced software version 7.1 or higher
•Mouse
Designation
SinuCom
Order No.
SinuCom FFS
The SinuCom FFS program is used to generate an image for the
PC card of the CCU/NCU of SINUMERIK 810D powerline/840D
powerline. It contains:
• Processing of the flash file system
• Preparing the image for programming the PC card
• Integrated help
startup/service tools
SinuCom NC (incl. SinuCom NC
Trace, SinuCom NC SI),
SinuCom FFS, SinuCom CFS,
SinuCom ARC,
SinuCom PCIN
Startup software for
SINAMICS S120/
The PC card is programmed using standard tools. These tools
are not included in SinuCom FFS.
SIMODRIVE 611 digital
Languages: English, French,
German, Italian, Spanish
Preconditions:
• Windows ME/NT 4.0/XP operating system
• SINUMERIK 810D powerline/840D powerline
When copying the software, be sure to follow the A&D software
marketing guidelines!
Documentation: English/German
• Single license
without data carrier
• Single license with CD-ROM
of current software version
• Single license with CD-ROM
6FC5250-0AY00-0AG1
6FC5250-0AY00-0AG0
6FC5250-7AY00-7AG0
SinuCom CFS
of specific software version
The SinuCom CFS program is used to generate an image for the
SINUMERIK 840D sl NCU’s CF card, in Ext3 format. It contains:
• Processing of the flash file system
• Preparing the image for programming the CF card
• Software update service
• Update on order of
specific software version
6FC5250-0AY00-0AG2
6FC5250-7AY00-7AG3
• Integrated help
Example of "specific software version", e.g., 7.1:
6FC5250-7....-1...
4/63
4