HMI software for CNC controls

More documents

Recommendations

Info

4 HMI software for CNC controls Supplementary hardware for HMI software MOBY I identification system Mobile data memories MDS ■ Overview MOBY identification systems ensure that important data accompanies the product from the very beginning. Mobile data memories (MDS) are first attached to the product or its transport or packing unit, e.g. workpiece carrier, then inscribed, modified and read using non-contact methods. All the information that is important for manufacturing and material flow control is thus available on the product. A rugged housing supports use under harsh industrial conditions and makes the MDS resistant to many chemical substances. MDS 401 Compact data memory (8 KB FRAM), flush button form for identifying small workpiece carriers, housing dimensions Ø 27 mm x 9 mm (1.06 in x 0.35 in), IP67 degree of protection, temperature range up to 85 °C (185 °F) MDS 402 Compact data memory (8 KB FRAM) for identifying small workpiece carriers (MDS 302 compatible), housing dimensions 47 mm x 25 mm x 15 mm (1.85 in x 0.98 in x 0.59 in), IP68/IPX9k degree of protection 1) , temperature range up to 70 °C (158 °F) MDS 403 Compact data memory (8 KB FRAM) with a read/write distance of up to 70 mm (2.76 in) for identifying, for example, small workpiece carriers, housing similar to MDS 302, housing dimensions 47 mm x 25 mm x 15 mm (1.85 in x 0.98 in x 0.59 in), IP68/IPX9K degree of protection, temperature range up to 85 °C (185 °F) MDS 404 Data memory for universal applications (8 KB FRAM), housing dimensions 50 mm x 50 mm x 20 mm (1.97 in x 1.97 in x 0.79 in) (compatible to MDS 413 E and MDS 114), IP68/IPX9K degree of protection, temperature range up to 85 °C (185 °F) MDS 506 Data memory for universal applications (32 KB FRAM), housing dimensions 75 mm x 75 mm x 40 mm (2.76 in x 2.76 in x 1.57 in), IP68 degree of protection, temperature range up to 70 °C (158 °F) MDS 514 Data memory for universal applications (32 KB FRAM), housing dimensions 50 mm x 50 mm x 20 mm (1.97 in x 1.97 in x 0.79 in), IP68/IPX9K degree of protection 1) ,temperature range up to 85 °C (185 °F) MDS 439 E Designed for skid identification in paint shops, 8 KB EEPROM, housing dimensions Ø 114 mm x 83 mm (4.49 in x 3.27 in), IP68 degree of protection, temperature range up to 220 °C (428 °F) cyclical 4/58 Siemens NC 60 · 2006 ■ Technical specifications Field data The field data for all MOBY I components of the MDS and SLG are shown in the table below. It is, therefore, easy to select the right MDS and SLG. The listed field data are typical values and are valid for a room temperature of 25°C (77 °F) and a supply voltage of 24 V DC. MDS 401 MDS 403 MDS 404 MDS 506 MDS 439 E MDS 402 MDS 514 Operating distance Sa /limit distance Sg in mm (in) SLG 40 2-8/10 (0.08-0.31/ 0.39) – – – – SLG 40S 2-6/8 (0.08-0.24/ 0.31) – – – – SLG 41/ 0-6/10 4-15/30 0-12/25 – – SLG 41 S/ (0-0.24/ (0.16-0.59/ (0-0.47/ SLG 41 C/ SLG 41 CC 0.39) 1.18) 0.98) SLG 42 – 10-30/80 0-30/60 10-35/70 10-55/70 (0.39-1.18/ (0-1.18/ (0.39-1.38/ (0.39-2.17/ 3.15) 2.36) 2.76) 2.76) SLG 43 – – 0-50/90 20- 20-80/125 (0-1.97/ 100/150 (0.79-3.15/ 3.54) (0.79-3.94/ 4.92) 5.91) SIM 41/ – 4-25/40 0-20/33 0-25/40 0-25/33 42/43 (0.16-0.98/ (0-0.79/ (0-0.98/ (0-0.98/ 1.57) 1.30) 1.57) 1.30) Note: FRAM memories have the advantages of the SRAM and EEPROM memory. They do not need a backup battery and can be read and written an almost unlimited number of times. ■ Selection and Ordering Data Designation Order No. MDS 401 mobile data memory 6GT2000-0CA10 8 KB FRAM MDS 402 mobile data memory 6GT2000-0CA20 8 KB FRAM MDS 403 mobile data memory 6GT2000-1CF00 8 KB FRAM MDS 404 mobile data memory 6GT2000-0EG00 8 KB FRAM, with fixing frame MDS 506 mobile data memory 6GT2000-0DC00-0AA0 32 KB FRAM MDS 514 mobile data memory 6GT2000-0DG10 32 KB FRAM, with fixing frame MDS 439 E mobile data memory 6GT2000-0CD30-0AD0 8 KB EEPROM Holder for MDS 439 E • Short type 6GT2090-0QA00 • Covering hood 6GT2090-0QB00 For further mobile data memories (MDS), see Catalog FS 10. 1) Extract: Test equipment: Steam blaster 0 °C, 30 °C, 60 °C, 90 °C (32 °F, 86 °F, 140 °F, 194 °F) Water flow:: 10 ... 15 l/min at 100 bar (75 °C/167 °F) Distance: 10 ... 15 cm (3.94 ... 5.91 in)
■ Overview The write/read device (SLG) supports inductive communication with the mobile data memories (MDS) and serial coupling to the interface modules (ASM). Various write/read devices (SLG) are available for small, medium and large distances to the MDS to satisfy customer requirements. SLG 40 S Write/read device with separate antenna (Ø 18 mm x 30 mm) (Ø 0.71 in x 1.18 in) for assembly lines with small workpiece holders, for example, max. W/R distance 8 mm (0.31 in), IP65 degree of protection, max. temperature 70 °C (158 °F) SLG 40 Write/read device with separate antenna (Ø 30 mm x 54 mm) (Ø 1.18 in x 2.13 in) for assembly lines with small workpiece holders, for example, max. W/R distance 10 mm (0.39 in), IP65 degree of protection, max. temperature 70 °C (158 °F) SLG 41 Universal, compact write/read device with rotatable antenna head, max. W/R distance 30 mm (1.18 in), housing dimensions 120 mm x 40 mm x 40 mm (4.72 in x 1.57 in x 1.57 in), IP65 degree of protection, max. temperature 70 °C (158 °F) SLG 41 S Same as SLG 41, but with antenna rotated by 90°. SLG 41 C Universal, compact write/read device with 3 m (9.84 ft) connecting cable, max. W/R distance 30 mm (1.18 in), housing dimensions 55 mm x 75 mm x 30 mm (2.17 in x 2.95 in x 1.18 in), IP67 degree of protection, max. temperature 70 °C (158 °F) SLG 41 CC Same as SLG 41 C, with 2 m (6.56 ft) connecting cable and double M12 plug. SLG 42 Universal, compact write/read device, max. W/R distance 70 mm (2.76 in), housing dimensions 75 mm x 75 mm x 40 mm (2.95 in x 2.95 in x 1.57 in), IP65 degree of protection, max. temperature 70 °C (158 °F) SLG 43 Universal, compact write/read device, max. W/R distance 150 mm (5.91 in), housing dimensions 75 mm x 75 mm x 40 mm (2.95 in x 2.95 in x 1.57 in), IP65 degree of protection, max. temperature 70 °C (158 °F) SIM 41/42/43 Universal write/read device with serial connection to PC/PLC, max. W/R distance 40 mm (1.57 in), housing dimensions 75 mm x 75 mm x 40 mm (2.95 in x 2.95 in x 1.57 in), IP54 degree of protection, max. temperature 70 °C (158 °F) HMI software for CNC controls Supplementary hardware for HMI software MOBY I identification system Write/read devices SLG ■ Selection and Ordering Data Designation Order No. ASM 452 adapter module 6GT2002-0EB20 for PROFIBUS DP V1, 1 SLG U92 or 2 SLG 4x, 7x, 8x can be connected, without connector Connector 6ES7194-1AA01-0XA0 for ASM 450/451/452 for connection to PROFIBUS DP and 24 V supply, 3 items required per ASM 450/451/452 ASM 473 adapter module 6GT2002-0HA10 ET200X expansion module for BM 141/142/143/147, 1 SLG can be connected per ASM 473 ASM 475 interface module 6GT2002-0GA10 max. 2 SLG can be connected in parallel mode, without front connector Write/read devices for connecting to ASM •SLG40S 6GT2001-0EB00 •SLG40 6GT2001-0EA10 •SLG41 6GT2001-0AA00 •SLG41S 6GT2001-0AA00-0AX0 •SLG41C 6GT2001-0AC00 •SLG41CC 6GT2001-0AC00-0AX0 •SLG42 6GT2001-0BA00 •SLG43 6GT2001-0CA10 Write/read devices for direct connection to the PC or PLC • SIM 41 6GT2005-0AA10 with V.24 (RS 232) interface • SIM 42 6GT2005-0BA10 with RS 422 (RS 485, V.11) interface • SIM 43 6GT2005-0CA10 with TTY (20 mA line current) interface MOBY software 6GT2080-2AA10 CD-ROM, FB/FC for SIMATIC/ SINUMERIK, 3964R driver for DOS/Windows 95/NT, C libraries, PC demonstration program, MOBY documentation Languages: German/English For SLG plug-in cables and documentation, see Catalog FS 10. Siemens NC 60 · 2006 4/59 4
Page 1 and 2:
HMI software for CNC controls 4/2 O
Page 3 and 4:
■ Overview The HMI-Advanced softw
Page 5 and 6:
■ Overview The ManualTurn operato
Page 7 and 8: ■ Selection and Ordering Data Des
Page 11 and 12: ■ Overview Measuring cycles Examp
Page 13 and 14: ■ Overview HMI software for CNC c
Page 15 and 16: HMI software for CNC controls Open
Page 17 and 18: ■ Overview EasyMask is a simple c
Page 19 and 20: ■ Overview Introduction With the
Page 21 and 22: ■ Overview DNC Cell supports hand
Page 23 and 24: ■ Overview DNC - Direct Numeric C
Page 25 and 26: ■ Overview DNC Compare is a suppl
Page 27 and 28: HMI software for CNC controls Motio
Page 31 and 32: ■ Overview Using the convenient d
Page 33 and 34: ■ Overview TDI Statistic provides
Page 37 and 38: ■ Overview With TDI Machine, tool
Page 41 and 42: ■ Overview MDA Cell is used to co
Page 43 and 44: ■ Overview The MDA IFC Interface
Page 47 and 48: ■ Overview MCIS TPM provides supp
Page 49 and 50: ■ Overview HMI software for CNC c
Page 51 and 52: ■ Overview Remote diagnostics int
Page 55 and 56: HMI software for CNC controls ePS N
Page 57: ■ Overview The MOBY I contactless
Page 61 and 62: ■ Technical specifications Type C
Page 63 and 64: HMI software for CNC controls Tools
Page 65 and 66: HMI software for CNC controls SINUM
Page 67 and 68: ■ Overview Comara KG Intelligent
Page 69 and 70: ■ Overview TwinCAM 32 CNC program
Page 71 and 72: MARPOSS S.p.A. Measuring, balancing
Page 73 and 74: ■ Overview MPM - Micro Präzision
Page 75 and 76: ■ Overview PROMETEC GmbH PROSIN d
show all

HMI software for CNC controls

Create successful ePaper yourself

Delete template?

Save as template?