HMI software for CNC controls
HMI software for CNC controls
HMI software for CNC controls
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
■ Overview<br />
The MOBY I contactless identification system has been successfully<br />
used <strong>for</strong> many years in a host of applications worldwide.<br />
It is specially designed <strong>for</strong> industrial production applications<br />
where there is a great demand <strong>for</strong> reliability, dynamic<br />
writing and reading, high degree of protection etc. It is used, <strong>for</strong><br />
example, where workpiece carriers, skids, overhead monorail<br />
conveyors have to be automatically identified quickly and reliably<br />
without contact. Depending on the requirements (system integration,<br />
EEPROM/FRAM, size, environmental conditions, large<br />
distance etc.), various<br />
• interface modules (ASMs)<br />
• read/write devices (SLGs)<br />
• mobile data memories (MDS)<br />
<strong>HMI</strong> <strong>software</strong> <strong>for</strong> <strong>CNC</strong> <strong>controls</strong><br />
Supplementary hardware <strong>for</strong> <strong>HMI</strong> <strong>software</strong><br />
MOBY I identification system<br />
■ Benefits<br />
7 Contact-free RF identification systems 1)<br />
7 Extensive range of reusable data memories (max. 32 KB<br />
FRAM/8 KB EEPROM)<br />
7 Special heat resistant or "long-range" data carriers <strong>for</strong> the<br />
automotive industry<br />
7 High data transfer rate between MDS and SLG; typically<br />
0.8 ms/byte<br />
7 Graduated read/write devices up to a maximum distance of<br />
150 mm (5.91 in)<br />
7 Simple integration into SIMATIC S5 and S7 incl. FB/FC as well<br />
as SINUMERIK<br />
7 Can be connected to any system, e.g. PC, via serial cables<br />
7 Simple connection to PROFIBUS DP (including FB/FC)<br />
7 Very high level of reliability even in case of contamination, oil,<br />
dust, and variations in temperature.<br />
7 Radio approval FTZ 17 TR 2100 or ETS 300 330/220/683<br />
7 Very high communication security of data transmission thanks<br />
to CRC and ECC<br />
7 Manufacturing and production data located directly on the<br />
product ("electronic delivery note")<br />
7 Simple restart in the event of faults, as all production parameters<br />
are located directly on the product<br />
7 Worldwide support, configuration and service support<br />
■ Application<br />
• Assembly technology,<br />
e.g. data memory is attached to the workpiece carrier<br />
• Conveyor systems,<br />
e.g. data memory is attached to a single rail overhead<br />
are available.<br />
conveyor<br />
Mobile data memories carry all current production and quality • Processing industry,<br />
data along with the product or workpiece carrier in automated e.g. data memory is attached to the product carrier<br />
production/manufacture.<br />
• Assembly lines in the automotive industry<br />
Using stationary as well as mobile read/write devices, the nec- (heat-resistant or long-range data memories)<br />
essary in<strong>for</strong>mation can be read without contact (inductively) • Flexible manufacturing systems.<br />
from the mobile data memory, regardless of the time and place.<br />
The data can also be supplemented or modified without the ■ More in<strong>for</strong>mation<br />
need <strong>for</strong> a direct line-of-sight.<br />
By means of a serial cable, the read/write devices are connected<br />
Additional in<strong>for</strong>mation is available in the Internet under:<br />
to the interface modules, which can be integrated into SIMATIC<br />
controllers or operated on PROFIBUS networks and on PCs.<br />
http://www.siemens.com/simatic-sensors/rf<br />
1) RF = radio frequency.<br />
Siemens NC 60 · 2006<br />
4/57<br />
4
Change language