HMI software for CNC controls

More documents

Recommendations

Info

4 HMI software for CNC controls SINUMERIK Solution Partners Mitutoyo Messgeräte GmbH Evaluation software ■ Overview 4/72 Siemens NC 60 · 2006 Montronix GmbH Tool and process monitoring ■ Overview Evaluation software for the feedback of measuring data Tool and process monitoring system The "Correct Plus" evaluation software ensures the fast feedback Montronix monitoring systems and the support of the Montronix of measuring data to machining centers when integrated in the employees will ensure that you have your machining process user interface of the CNC control. It makes the immediate online under control. Montronix is your competent partner worldwide correction of machining data, which are received continuously or for all machining tasks. as samples by a coordinate measuring device, possible. Online correction can include each individual feature, e.g., the position and diameter of drilled holes. Montronix systems provide you with the following advantages: 7 Tool monitoring and protection Advantages: 7 Shorter machine downtimes 7 Integration of the calculated correction values into the correc- 7 Avoidance of faults and reduction in rejects tion database of the machine tool 7 Improvement in quality 7 Production of the subsequent workpiece with corrected data 7 Optimization of machining process due to the immediate transfer of the modified work program to the machine control unit 7 Cost-saving shortening of the run-in times of new process sequences The visualization software (M-View) enables the machine operator to evaluate the machining process rapidly and precisely. The graphic display shows process deviations, broken tools, increasing wear and collisions, and these can be statistically 7 A.S.A.P. change-over of 100% measurements to inspections recorded and evaluated. on the basis of samples due to an extremely quick stabilization of run-in times The IPM (Integrated Process Monitor) operator control and visualization software combines operation and simultaneous visual- 7 Automatic analysis of measurement results, calculation of new ization. Communication is via an RS 232 C or RS 485 interface. set values and direct creation of correction databases without time losses 7 Clear improvement of process security thanks to error reduction, since the corrections are always performed in the It is possible to switch from the machining process to process visualization at any time. A fast, reliable working method is ensured by the clear and simple operation. direction of the nominal value 7 Considerable reduction in scrap, since possible fabrication ■ More information defects do not cumulate all the time, but can be corrected Please contact: directly on the next workpiece to be processed 7 Full automation of process sequences via optional software 7 Executes under Windows 98/NT 4.0/2000/XP Montronix GmbH Contact: Mr. J. Kraft Am Teerhaus 5 ■ More information 71720 OBERSTENFELD Germany Please contact: Phone: +49 (0) 70 62 - 67 93 - 00 Mitutoyo Messgeräte GmbH Fax: +49 (0) 70 62 - 67 93 - 10 Contact: Mr. Ralf Kuzella Borsigstraße 8-10 41469 NEUSS Germany Phone: +49 (0) 21 37 10 20 Fax: +49 (0) 21 37 86 85 E-mail: r.kuzella@mitutoyo.de Internet: http://www.mitutoyo.de E-mail: info@montronix.de Internet: http://www.montronix.de
■ Overview MPM – Micro Präzision Marx GmbH Balancing software Balancing software Highlights: 7 The BALCON balancing software supports the operation of fully automatic balancing systems within the control. 7 All relevant settings, such as tolerance, speed and alarm limits, can be adjusted using the control. 7 The balancing process can be carried out fully-automatically or semi-automatically (to permit adjustments as necessary). 7 The control of All MPM balancing equipment (flange mounting, spindle mounting and special equipment) can be optimized using the BALCON balancing software and the AB100 balancing modules. ■ More information Please contact: MPM - Micro Präzision Marx GmbH Contact: Mr. Hartwig Neuenweiherstraße 19 91056 ERLANGEN Germany Phone: +49 (0) 91 31 - 90 57 - 0 Fax: +49 (0) 91 31 - 90 57 - 20 E-mail: mpm@marx-online.com Internet: http://www.marx-online.com HMI software for CNC controls SINUMERIK Solution Partners Nordmann GmbH & Co. KG Tool monitoring ■ Overview PROFIBUS-capable, highly-sensitive tool monitoring using SEM-PROFIBUS The SinTerm software supports efficient tool monitoring in series production. In addition to the 8-channel sensor-free active power or torque measurement via the PROFIBUS, this solution integrated in the control also permits connection of up to 8 further sensors from the Nordmann range, permitting monitoring of the complete range of tools. The following additional measuring systems are available: • Force sensors, also as expansion sensors for particularly easy mounting • Structure-borne noise sensors (with contact or contact-free, various patents for connection to moving tools or workpieces, e.g., via a coolant jet as sound wave guide) • Active power meters for analog drives without PROFIBUS capability • Buttons for checking workpiece lengths in automatic multispindle lathes • Audible dimensional checking of workpieces using a test tool in CNC turning machines • Optical laser sensors for direct checking of workpiece length or workpiece surface • Sensors directly on the tool insert for exact determination of wear and breakage even when manufacturing single parts The measured values adapted in real-time to the monitoring task are displayed on the operator panel and evaluated using envelope curves, dynamic or static limits for tool wear, breakage, workpiece contact, or workpiece dimension. ■ More information Please contact: Nordmann GmbH & Co. KG Contact: Dr.-Ing. Klaus Nordmann Kalscheurener Straße 8 50354 HÜRTH Germany Tel.: +49 (0) 22 33 - 96 88 - 0 or 0700/NORDMANN(=0700/66736266) Fax: +49 (0) 22 33 - 96 88 - 22 E-mail: nordmann@nordmann-online.de Internet: http://www.nordmann-online.de Siemens NC 60 · 2006 4/73 4
Page 1 and 2:
HMI software for CNC controls 4/2 O
Page 3 and 4:
■ Overview The HMI-Advanced softw
Page 5 and 6:
■ Overview The ManualTurn operato
Page 7 and 8:
■ Selection and Ordering Data Des
Page 9 and 10:
■ Selection and Ordering Data Des
Page 11 and 12:
■ Overview Measuring cycles Examp
Page 13 and 14:
■ Overview HMI software for CNC c
Page 15 and 16:
HMI software for CNC controls Open
Page 17 and 18:
■ Overview EasyMask is a simple c
Page 19 and 20:
■ Overview Introduction With the
Page 21 and 22: ■ Overview DNC Cell supports hand
Page 23 and 24: ■ Overview DNC - Direct Numeric C
Page 25 and 26: ■ Overview DNC Compare is a suppl
Page 27 and 28: HMI software for CNC controls Motio
Page 31 and 32: ■ Overview Using the convenient d
Page 33 and 34: ■ Overview TDI Statistic provides
Page 37 and 38: ■ Overview With TDI Machine, tool
Page 41 and 42: ■ Overview MDA Cell is used to co
Page 43 and 44: ■ Overview The MDA IFC Interface
Page 45 and 46: ■ Selection and Ordering Data Des
Page 47 and 48: ■ Overview MCIS TPM provides supp
Page 49 and 50: ■ Overview HMI software for CNC c
Page 51 and 52: ■ Overview Remote diagnostics int
Page 53 and 54: ■ Selection and Ordering Data Des
Page 55 and 56: HMI software for CNC controls ePS N
Page 57 and 58: ■ Overview The MOBY I contactless
Page 59 and 60: ■ Overview The write/read device
Page 61 and 62: ■ Technical specifications Type C
Page 63 and 64: HMI software for CNC controls Tools
Page 65 and 66: HMI software for CNC controls SINUM
Page 67 and 68: ■ Overview Comara KG Intelligent
Page 69 and 70: ■ Overview TwinCAM 32 CNC program
Page 71: MARPOSS S.p.A. Measuring, balancing
Page 75 and 76: ■ Overview PROMETEC GmbH PROSIN d
show all

HMI software for CNC controls

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?