UC4™ Total Control™ Automatic Boom Height Technical ... - Norac
UC4™ Total Control™ Automatic Boom Height Technical ... - Norac
UC4™ Total Control™ Automatic Boom Height Technical ... - Norac
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.2 TYPICAL OPERATION<br />
5.2.1 Normal Operating Screen<br />
The Normal Operating Screen provides information pertaining to the height<br />
and mode of both booms. Figure 7 shows a typical Normal Operating<br />
Screen.<br />
LEFT BOOM<br />
TARGET HEIGHT<br />
11<br />
LEFT BOOM VALVE<br />
COMMAND (DOWN)<br />
LEFT BOOM CONTROL<br />
MODE (AUTOMATIC)<br />
Figure 7 – Normal Operating Screen<br />
RIGHT BOOM<br />
ACTUAL HEIGHT<br />
RIGHT BOOM CONTROL<br />
MODE (MANUAL)<br />
When a boom is in AUTO mode, indicated by an "A" in the control mode<br />
portion of the screen, the UC4 panel shows the target boom height. In<br />
MANUAL mode, indicted by an "M" in the control mode portion of the<br />
screen, the UC4 control panel shows the current boom height reading.<br />
In both AUTO and MANUAL modes, the screen will also show arrows to<br />
indicate that the boom is being commanded to move. Table 2 explains<br />
some examples of typical Normal Operating Screens.