Modular units

61035N
PE57842
Characteristics of
the functional units
Auxiliaries
Motor option and releases for Evolis circuit breakers
17.5 kV frontal
Charging motor and associated mechanism (P2)
Power supply (Vac 50/60 Hz) 48/60 100/130 200/240
(Vdc) 24/30 48/60 100/125 200/250
Threshold 0.85 to 1.1 Ur
Consumption (VA or W) 180
Motor overcurrent 2 to 3 Ir during 0.1 s
Charging time 6 s max.
Switching rate 3 cycles per minute max.
CH contact 10 A 240 V
Opening release (MITOP low energy)
Power supply Direct current
Threshold 0.6 A < I < 3 A
Response time
to the circuit breaker at Ur
Opening release (MX)
50 ms (protection relay setting)
Power supply (Vac 50/60 Hz) 24 48 100/130 200/250
(Vdc) 24/30 48/60 100/130 200/250
Threshold 0.7 to 1.1 Ur
Consumption (VA or W) Pick-up: 200 (during 200 ms)
Hold: 4.5
Response time
50 ms ± 10
to the circuit breaker at Ur
Closing release (XF)
Power supply (Vac 50/60 Hz) 24 48 100/130 200/250
(Vdc) 24/30 48/60 100/130 200/250
Threshold 0.85 to 1.1 Ur
Consumption (VA or W) Pick-up: 200 (during 200 ms)
Hold: 4.5
Auxiliaires contacts for vacuum contactor
The auxiliary contacts are of the changeover type with a common point.
The following are available:
b 3 NO + 3 NC for the electrically held version (optional 3 NO & 3 NC additional
auxiliary contacts),
b 5 NO + 6 NC for the mechanically latched version as standard.
Characteristics
Operating voltage Minimum 48 V
Maximum 480 V
Rated current 10 A
Breaking capacity Vdc 60 W (L/R 150 ms)
Vac 700 VA (power factor 0.35)
Open release characteristics
Power supply (Vdc) 48 125 250
Consumption (W) 470 680 640
Response time (ms) 20-40 20-41 20-40
70 AMTED398078EN.indd