11-12 GA-1120 Color Management - Toshiba

2-18 Color Calibration
In the Paper Size menu, the menu will automatically select LTR/A4 for 21 Patches or
11x17/A3 for 34 Patches.
In the Input Tray menu, specify the paper source.
6. Retrieve the measurement page from the copier.
7. Click Measure in the Get Measurements pane.
The Measurements Options dialog box appears.
8. Choose Clicks Per Patch, Audio Feedback, and Port options, and then click Start.
The Page Type menu automatically chooses the measurement page type that you
printed in step 6.
Use the arrow buttons next to the Clicks Per Patch field to choose the number of
measurements you want to take for each patch on the page. When you choose multiple
clicks, the average value of all measurements taken for the patch is returned to the
GA-1120. Multiple measurements are more accurate, but may take more time.
Select the Audio Feedback option if you want to hear a confirmation tone each time a
measurement is recorded. A single tone indicates a successful measurement; two tones
indicate a measurement error. If you have specified multiple clicks per patch, the tone
sounds after you take the final measurement.
If necessary, choose the appropriate COM port for the ED-100 from the Port menu.