Getting Started with IWS and TwinCAT Contents - InduSoft

Getting Started with IWS and TwinCAT DRAFT — 8 September 2006
3) Click Search (Ethernet). The Add Route dialog is displayed:
Figure 32: Add Route Dialog
4) Click Broadcast Search. The System Manager will search the network for other TwinCAT stations
and display them. Stations to which routes have already been established will be marked:
Figure 33: Results of Broadcast Search for Other TwinCAT Stations
5) Select a new station and click Add Route, or simply double-click on the station. You will be
prompted for a Username and Password for the station:
Figure 34: Logon Information for the Target Station
6) Enter the Username and Password for the new station, and then click OK.
� Note
– If the target station is a Beckhoff CX Series device (CX1020 or CX1000) running Windows
CE, then the default Username is administrator with no password.
Page 30/60 InduSoft Ltd.