SmartStor NS4600 Product Manual - Promise Technology, Inc.

Chapter 7: PASM
• Connecting to PASM (below)
• Choosing a Language (page 129)
• Navigating in PASM (page 129)
• Logging out of PASM (page 129)
• Setting up SmartStor with the Setup Wizard (page 130)
• Managing Users and Groups (page 132)
• Managing File & Print Services (page 137)
• Managing RAID Volumes (page 147)
• Managing Backups (page 152)
• Managing the Network Connection (page 156)
• Making Management Settings (page 159)
• Managing the System (page 165)
Connecting to PASM
The Promise Advanced Storage Manager (PASM) software is factory-installed on
the SmartStor system. PASM runs in the browser on your PC. You can access
PASM:
• Directly in your browser. See page 123.
• Through SmartNAVI. See page 125.
• Using Bonjour. See page 127.
PASM in your Browser
To log into PASM in your browser:
1. Start your Browser.
2. In the Browser address field, type in the IP address of the SmartStor.
See “Finding the SmartStor’s IP Address” on page 22.
Note that the IP address shown below is only an example. The IP address
you type into your browser will be different.
• PASM uses an HTTP connection . . . . . . . . . . . . . . . . . . . . . . .http://
• Enter the SmartStor’s IP address . . . . . . . . . . . . . . 192.168.50.129/
Together, your entry looks like this: http://192.168.50.129/
The browser opening screen displays.
123