SmartStor NS4600 Product Manual - Promise Technology, Inc.

187
Chapter 9: Troubleshooting
5. In the confirmation box, type yes into the field provided, then click the OK
button.
During the File System Check or Rebuild, the System Status LED blinks
amber and the Disk Activity LEDs blink blue. See page 183, Figure 1.
The time needed to check and rebuild the File System depends on the
amount of data on the SmartStor. The process can take anywhere from 10
minutes to 2 hours.
Warning
Do not disconnect the power or shut down the SmartStor while the
check/rebuild is running!
Checking the Event Log in PASM
To view the Event Log in PASM:
To check Enclosure status:
1. Start PASM.
See “PASM in your Browser” on page 123.
Or see “PASM in SmartNAVI” on page 125.
Or see “PASM in Bonjour” on page 127.
2. In the Tree, click the + beside the Management icon.
3. Click the Event Log icon.
The Event Log displays. See Figure 4.