SmartStor NS4600 Product Manual - Promise Technology, Inc.

Managing the System
This category includes the following topics:
• Setting System Date and Time (page 165)
• Adjusting for Daylight Saving Time (page 165)
• Running the Network Time Protocol (page 166)
• Viewing the Results of NTP Synchronization (page 166)
• Rebooting the SmartStor (page 167)
• Shutting Down the SmartStor (page 167)
• Restarting the SmartStor (page 168)
• Locating the SmartStor (page 168)
• Viewing System Information (page 168)
• Viewing Enclosure Information (page 169)
• Enabling the Smart Fan (page 169)
Setting System Date and Time
To set the date and time on the SmartStor:
1. In the Tree, click the + beside the System icon.
2. Click the Date / Time icon.
3. Click the Setup tab.
4. From the dropdown menus, choose the time and date values.
5. Click the OK button.
6. In the confirmation box, click the OK button.
Adjusting for Daylight Saving Time
165
Chapter 7: PASM
To adjust the SmartStor’s clock for daylight saving time:
1. In the Tree, click the + beside the System icon.
2. Click the Date / Time icon.
3. Click the Time Zone tab.
4. Check the Adjust clock for daylight saving changes box.
5. From the dropdown menu, choose the increment for daylight saving time in
your location.
6. Click the OK button.
7. In the confirmation box, click the OK button.