SmartStor NS4600 Product Manual - Promise Technology, Inc.

19
Chapter 2: Installation and Setup
5. Choose a Setup Mode and click the button:
• One Click Setup – Loads a collection of default settings.
Recommended for most users.
• Advanced Setup – Enables you to make your own settings.
Recommended for advanced users.
6. Click the OK button to continue.
If you chose One Click Setup, the Wizard creates a RAID Volume and a
default folder called Public. You are finished with the setup.
If you chose Advanced Setup, go to the next step.
7. Choose Automatic (DHCP) or Manual network settings.
If you chose Manual settings, type entries for each of the following
parameters in the fields provided:
• Computer (NAS system) Name
• IP Address
• Subnet Mask
• Gateway
• Primary and Secondary DNS – optional
8. Click the Next button to continue.