S90 XS/S70 XS Reference Manual - zZounds.com
S90 XS/S70 XS Reference Manual - zZounds.com
S90 XS/S70 XS Reference Manual - zZounds.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2 Note<br />
From this display you can set the pitch- and keyboard-related parameters<br />
for each Zone — allowing you to set up Zone splits and determine the<br />
pitch range for each Zone.<br />
Octave (Octave Shift)<br />
Determines the amount in octaves by which the range of the Zone is<br />
shifted up or down. You can adjust the offset up or down over a maximum<br />
range of three octaves.<br />
Settings: -3 – +0 (Default) – +3<br />
Transpose<br />
Determines the amount in semitones by which the range of the Zone is shifted up or down.<br />
Settings: -11 – +0 (Default) – +11<br />
Note Lmt Lo (Note Limit Low)<br />
Note Lmt Hi (Note Limit High)<br />
Determines the lowest and highest notes of the range for each Zone.<br />
Settings: C -2 – G8<br />
NOTE: You can also set the Note directly from the Keyboard, by holding down the [SHIFT] button and pressing the desired key.<br />
3 Preset<br />
From this display you can make the Voice-related settings for each Zone<br />
which will be transmitted as MIDI messages automatically when the<br />
Master is selected.<br />
Bank MSB (Bank Select MSB)<br />
Bank LSB (Bank Select LSB)<br />
PC (Program Change Number)<br />
Determines the Voice-related settings for each Zone in the selected Master. The selected Voices depend on the external<br />
MIDI devices.<br />
Settings: Bank MSB (Bank Select MSB): 000 – 127<br />
Bank LSB (Bank Select LSB): 000 – 127<br />
PC (Program Change): 001 – 128<br />
Volume<br />
Determines the Volume settings for each Zone in the selected Master.<br />
Settings: 000 – 127<br />
Pan<br />
Determines the Pan settings for each Zone in the selected Master.<br />
Settings: L64 – C – R63<br />
MIDI Send Sw (MIDI Send Switch)<br />
Determines whether the MIDI message is transmitted (on) or not when setting the parameters on this display. When set<br />
to “on,” changing the value in this display transmits the corresponding MIDI messages to an external/internal tone<br />
generator.<br />
Settings: off, on<br />
NOTE: Note that this setting automatically returns to off at power-off.<br />
<strong>Reference</strong> <strong>Manual</strong><br />
<strong>Reference</strong><br />
Basic Structure<br />
Voice<br />
Performance<br />
Multi<br />
SEQ Play<br />
Master<br />
Remote<br />
File<br />
Audio Rec/Play<br />
Utility<br />
Master<br />
Play<br />
Edit Select<br />
Common Select<br />
Name<br />
Memory<br />
Zone Sw<br />
Zone Edit Select<br />
Transmit<br />
Note<br />
Preset<br />
Knob/Slider<br />
Job Select<br />
Bulk<br />
Initialize<br />
Appendix<br />
119