S90 XS/S70 XS Reference Manual - zZounds.com

Performance Job
The Performance Job mode features some convenient data organization and initialization tools, for use when creating
Performances and archiving them.
Operation [PERFORM] Select Performance [JOB] Performance Job Select display
1 Recall
If you are editing a Performance but you have not stored it before switching to another Performance, the edits you have
made will be cleared. If this happens, you can use the Recall function to restore the Performance with your latest edits
intact. Press the [ENTER] button to execute the Recall.
2 Bulk (Bulk Dump)
This function lets you send your edited parameter settings for the currently selected Performance to a computer or
another MIDI device for data archiving. Press the [ENTER] button to execute the Bulk Dump.
NOTE: You can execute this function by holding down the [SHIFT] button and pressing the [PERFORM] button.
NOTE: In order to execute Bulk Dump, you will need to set the correct MIDI Device Number. For information on the MIDI Device
Number setting, refer to page 137.
3 Copy
Part
This convenient operation lets you copy Common Edit and Part Edit settings
of a certain Performance to the currently edited Performance. This is useful
if you are creating a Performance and wish to use some parameter settings
of another Performance.
NOTE: When this display is shown, you can hear the original sound at copy source
by pressing the [EDIT] button to call up the Compare mode. Pressing the
[EDIT] button again will exit from the Compare mode.
1 Source Performance
Determines the Bank and the Performance number to be copied. When “current” is selected, the current Performance is specified as
Source Performance. Accordingly, you can copy the parameter settings from a Part to a different Part of the same Performance.
Settings: Bank: USR1 – 4, ---
Performance number: 001(A01) – 128 (H16), current
NOTE: You can select the Performance by pressing the [CATEGORY SEARCH] button when the cursor is at Source Performance.
2 Data type of the source
1
4
Determines the source data type including the Part number. According to the setting here, the Data type of the destination will be
automatically set to the appropriate item.
Settings: common, part 1 – 4, A/D
3 Data type of the destination
Determines the destination data type including the Part number. According to the setting here, the Data type of the source will be
automatically set to the appropriate item.
Settings: common, part 1 – 4, A/D
Reference Manual
2
3
Reference
Basic Structure
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Performance
Play
Mixing
Edit Select
Common Edit
Name
Play Mode
Arpeggio
Controller
Filter / EG
EQ
Effect
Parameter
A/D Out
A/D FX
Parameter
Part Edit
Voice
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Filter / EG
3 Band EQ
Rcv Sw
FX Send
Job Select
Recall
Bulk
Copy
Initialize
Supplementary Info.
Appendix
90