S90 XS/S70 XS Reference Manual - zZounds.com

Operation in the Remote mode
Transport
In the Remote mode, the Function buttons will work as transport control buttons.
Knobs
In the Remote mode, two functions can be assigned to each Knob. You can change the function by using the Knob
Function buttons. Four functions can be assigned to each Knob Function button (Upper/Lower). The assigned function
will be shown on the display when pressing the Knob Function button. When pressing the upper Knob Function button,
the “TONE” lamp will flash. When pressing the lower Knob Function button, the “MIC” lamp will flash.
Sliders
Top (going back to the start of the song)
Repeat
Stop
In the Remote mode, a function can be assigned to each Slider. The assigned function will be shown on the display
when pressing the Slider Function button. When pressing the Slider Function button, the “VOLUME” lamp will flash.
NOTE: Note that you need to use the S90 XS/S70 XS Remote Editor to assign functions to the Knobs and Sliders. For details on
operation, refer to the S90 XS/S70 XS Remote Editor Owner’s Manual.
NOTE: When using Cubase series as DAW software, you need to install the S90 XS/S70 XS Remote Tools to your computer beforehand.
The S90 XS/S70 XS Remote Editor and the S90 XS/S70 XS Extension will be installed to your computer when installing the S90
XS/S70 XS Remote Tools. The S90 XS/S70 XS Extension is software which integrates the S90 XS/S70 XS with Cubase.
The S90 XS/S70 XS Remote Tools can be downloaded from the following URL:
http://www.yamahasynth.com/download/
Reference Manual
Play
Record
Reference
Basic Structure
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Remote
Appendix
124