S90 XS/S70 XS Reference Manual - zZounds.com

Utility Mode
In the Utility mode, you can set parameters that apply to the entire system of this instrument. To enter the Utility mode,
press the [UTILITY] button. Pressing the [EXIT] button returns to the original display.
Operation
1 General
Volume
Determines the overall volume of the instrument.
Settings: 0 – 127
Note Shift
Determines the amount (in semitones) by which the pitch of all notes is shifted.
Settings: -24 semi – +0 semi – +24 semi
Tune
Determines the tuning of the S90 XS/S70 XS’s overall sound. You can adjust the tuning in cent increments.
Settings: -102.4 cents [414.7Hz] – +0 cents [440.0Hz] – +102.3 cents [466.8Hz]
L&R Gain
Determines the output gain of the OUTPUT L/MONO and R jacks.
Settings: 0dB, +6dB
Asgn L&R Gain (Assign L&R Gain)
Determines the output gain of the ASSIGNABLE OUT L and R jacks.
Settings: 0dB, +6dB
1
4
7
Kbd Octave (Keyboard Octave)
Determines the amount in octaves by which the range of the keyboard is shifted up or down. This setting can be
changed also by pressing any of the OCTAVE buttons.
Settings: -3 – +0 – +3
Kbd Transpose (Keyboard Transpose)
Determines the amount in semitones by which the range of the keyboard is shifted up or down. This setting can be
changed also by pressing any of the TRANSPOSE buttons.
Settings: -11 semi – +0 semi – +11 semi
[UTILITY] Select the desired display in the Utility Select display [ENTER]
Edit display
2
5
Reference Manual
3
6
9
8
Utility Select display Edit display (in case of General)
Reference
Basic Structure
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Utility
Audio Rec/Play
Utility
Utility Select
General
Layer/Split/
Drum Assign
MIDI
Controller
Micro Tune
Voice Select
Arpeggio
A/D Out
A/D FX
Master FX
Master EQ
Remote
Quick Set
Panel Lock
Fctry Set
Appendix
133