S90 XS/S70 XS Reference Manual - zZounds.com
S90 XS/S70 XS Reference Manual - zZounds.com
S90 XS/S70 XS Reference Manual - zZounds.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Modulation (Control #1)<br />
Messages which control vibrato depth using the Modulation Wheel. Setting the value to 127 produces<br />
maximum vibrato and 0 results in vibrato off.<br />
Portamento Time (Control #5)<br />
Messages which control the duration of portamento, or a continuous pitch glide between successively<br />
played notes. Setting the value to 127 produces maximum portamento time and 0 results in minimum<br />
portamento time.<br />
When the parameter Portamento Switch (Control #65) is set to on, the value set here can adjust the speed<br />
of pitch change.<br />
Data Entry MSB (Control #6)<br />
Data Entry LSB (Control #38)<br />
These parameters specify the value of RPN MSB and RPN LSB events. Parameter value is determined by<br />
<strong>com</strong>bining the MSB and LSB.<br />
Main Volume (Control #7)<br />
Messages which control the volume of each Part. Setting the value to 127 produces maximum volume and<br />
0 results in volume off. This provides detailed control over the level balance among the parts.<br />
Pan (Control #10)<br />
Messages which control the stereo panning position of each Part (for stereo output). Setting the value to<br />
127 positions the sound to the far right and 0 positions the sound to the far left.<br />
Expression (Control #11)<br />
Messages which control intonation expression of each Part during performance. Setting the value to 127<br />
produces maximum volume and 0 results in volume off. This parameter produces volume variations during<br />
playback.<br />
Hold1 (Control #64)<br />
Messages which control sustain on/off. Notes playing when the pedal is pressed will be sustained. Values<br />
between 64 – 127 turn the sustain on, while values between 0 – 63 turn the sustain off.<br />
Portamento (Control #65)<br />
Messages which control portamento on/off. When the value is set to “0” – “63,” portamento is OFF; when<br />
set to “64” – “127,” portamento is ON.<br />
When “Mono/Poly” is set to “mono,” if this parameter is set to ON, you can effectively perform legato<br />
passages by playing successive notes smoothly with no breaks between notes (in other words, holding<br />
down one key and not releasing it until the next is played).<br />
The length (degree) of the portamento effect is controlled by Portamento Time (Control #5).<br />
Sostenuto (Control #66)<br />
Messages which control sostenuto on/off. Values between 64 – 127 turn sostenuto on, while values<br />
between 0 – 63 turn sostenuto off.<br />
Holding specific notes and then pressing and holding the sostenuto pedal will sustain those notes as you<br />
play subsequent notes, until the pedal is released.<br />
Harmonic Content (Control #71)<br />
Messages which adjust the filter resonance set for each Part. The value set here is an offset value which<br />
will be added to or subtracted from the voice data.<br />
Release Time (Control #72)<br />
Messages which adjust the AEG release time set for each Part.<br />
The value set here is an offset value which will be added to or subtracted from the voice data.<br />
Attack Time (Control #73)<br />
Messages which adjust the AEG attack time set for each Part.<br />
The value set here is an offset value which will be added to or subtracted from the voice data.<br />
<strong>Reference</strong> <strong>Manual</strong><br />
Appendix<br />
Basic Structure<br />
Functional Blocks<br />
Tone Generator<br />
A/D Input<br />
Arpeggio<br />
Sequencer<br />
Audio Record/Play<br />
Controller<br />
Effect<br />
Internal Memory<br />
<strong>Reference</strong><br />
Voice<br />
Performance<br />
Multi<br />
SEQ Play<br />
Master<br />
Remote<br />
File<br />
Audio Rec/Play<br />
Utility<br />
Appendix<br />
About MIDI<br />
Display Messages<br />
Troubleshooting<br />
148