Sidewinder G2 6.1.1 Administration Guide - Glossary of Technical ...

Figure 5-12. Network
Object: netgroup
window
Entering netgroup
information
Creating network objects
When you add a new netgroup object, the following window appears.
This window is used to define information about a netgroup. Each
group you define becomes a network object that can be used in a
rule. Follow the steps below.
1. In the Name field, type the name of the new netgroup. The name will be
used by rules to identify the netgroup when you set up Sidewinder G2
connections. (This field cannot be edited if you are modifying an
existing group.) Valid values include alphanumeric characters, periods
(.), dashes(-), and underscores (_), and spaces ( ). However, the first and
last character of the name must be alphanumeric. The name cannot
exceed 100 characters.
2. [Optional] In the Description field, enter any useful information about
this group.
3. To add a member to this netgroup, highlight the member in the
Available Members list that you want to add, and then click the ==>>
button to move it to the Chosen Members list. To remove a network
object from this netgroup, highlight the object in the Chosen Members
list, and then click the