Sidewinder G2 6.1.1 Administration Guide - Glossary of Technical ...

Figure 13-6. Client
Address Pools: Subnets
tab
Configuring the Subnets
tab
Configuring client address pools
The Subnets tab allows you to define the virtual address subnet for
this address pool. You can also specify any local networks that you
want to be accessible to remote clients using this pool. Follow the
steps below.
1. Configure the Virtual Subnet List. This list defines the virtual subnets
that define the IP address ranges that are available within this pool. The
following options are available:
Create a new virtual subnet—Click New to define a new entry in
the Local Subnet List. See “Adding or modifying a subnet address”
for details.
Modify a virtual subnet—Highlight the subnet you want to modify
and click Modify to modify an existing entry in the Local Subnet
List. See “Adding or modifying a subnet address” on page 13-22 for
details.
Delete a virtual subnet—Highlight the subnet you want to delete
and click Delete to delete an existing entry from the Local Subnet
List.
Configuring Virtual Private Networks 13-21