Sidewinder G2 6.1.1 Administration Guide - Glossary of Technical ...

Creating IP Filter rules
Figure 7-7. IP Filter Rules
Source/Dest tab
7-14 Creating Rules and Groups
5. In the Audit Level field, select the type of audit you want performed on
when a packet matches this rule.
None—No audit information will be recorded for this rule.
Informational—Select this option to generate errors, normal traffic,
and informational audit events for this rule.
Traffic—Select this option to generate normal traffic and error
audit events for this rule.
Errors Only—Select this option to generate only error audit events
for this rule. If you select this option, normal traffic will not be
logged. (This option increases performance and reduces the size
of audit logs.)
6. [Conditional] If you selected Informational for the audit level, in the
Audit Threshold field, specify the number of packets that will be allowed
by this rule before an audit record is generated. To disable auditing for
this IP Filter rule, set the value to zero (0).
7. [Optional] In the Description field, enter any useful information about
this IP Filter rule (for example, a brief description of the rule).
8. To configure the source and destination information for this IP Filter
rule, select the Source/Dest tab. The following window appears.