Sidewinder G2 6.1.1 Administration Guide - Glossary of Technical ...

Configuring client address pools
About the New Pool
window
13-20 Configuring Virtual Private Networks
The New Pool window allows you to create a new client address
pool. Follow the steps below.
1. In the Pool Name field, type the name of the new address pool.
2. In the Virtual Subnet field, specify the network portion of the IP
addresses that will be used in the client address pool, and the number
of bits to use in the network mask. The network mask specifies the
significant portion of the IP address.
3. In the Define the Local Subnets available to remote clients area, configure
the local networks that will be available to remote clients that establish
a VPN association using an address from the client address pool. The
following options are available:
Create a new local subnet—Click New to define a new entry in the
Local Subnet List. See “Adding or modifying a subnet address” for
details.
Modify a local subnet—Highlight the subnet you want to modify
and click Modify to modify an existing entry in the Local Subnet
List. See “Adding or modifying a subnet address” on page 13-22 for
details.
Delete a local subnet—Highlight the subnet you want to delete
and click Delete to delete an existing entry from the Local Subnet
List.
4. Click Add to add the new client address pool. To configure the Server
tab, see “Configuring the Subnets tab” on page 13-20. To configure the
Fixed IP Map tab, see “Configuring the DNS and/or WINS servers” on
page 13-22.
Configuring the Subnets tab
To configure the virtual subnet address, select VPN Configuration ->
Client Address Pools and select the client address pool that you want to
configure from the Pools list. The following tab appears.