Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3 - PCI Card & Interfaces<br />
The 0202 Daughter Card<br />
At the 96kHz or 192kHz sample rates, the industry standard S/MUX interleaving<br />
scheme is used for ADAT input and output. S/MUX uses additional ADAT channels to<br />
achieve the required bandwidth. See the chart below or go here for additional information.<br />
Sample Rate Number of Audio Channels<br />
44kHz/48kHz 8 channels of 24-bit audio<br />
88.2kHz/96kHz 4 channels of 24-bit audio, using S/MUX standard<br />
176.4kHz/<br />
192kHz<br />
2 channels of 24-bit audio, using S/MUX standard<br />
The 0202 Daughter Card<br />
The 0202 Daughter card is the companion card for E-MU 1010 systems which don’t<br />
include the MicroDock. The 0202 Daughter card provides one pair of 24-bit balanced<br />
analog inputs and one pair of 24-bit balanced analog outputs, plus MIDI in and out.<br />
Connections<br />
Left / Right<br />
Line <strong>Input</strong>s<br />
Left / Right<br />
Line Outputs<br />
MIDI<br />
In/Out<br />
Analog <strong>Input</strong>s and Outputs<br />
The 0202 Daughter Card provides two balanced,<br />
analog inputs and two balanced, line level analog<br />
outputs. The inputs can be connected to any line level<br />
stereo signal from keyboards, CD-players, cassette<br />
decks, etc. The analog inputs are assigned to a mixer<br />
strip in the mixer application.<br />
The outputs can feed any line level input such as a<br />
mixing board, the auxiliary input on your stereo or a<br />
set of powered speakers. The line outputs are NOT<br />
designed to drive headphones directly. Connect the<br />
line outputs to a stereo receiver or mixer with a<br />
headphone jack to obtain the proper current drive.<br />
Either TRS (tip-ring-sleeve) balanced or TS unbalanced<br />
cables can be used. Balanced cables provide<br />
better noise immunity and +6dB higher signal level.<br />
The output line level can be set to accommodate the<br />
consumer -10dBV standard, or the pro audio +4 dBu<br />
standard in the I/O screen of the Session Settings<br />
dialog box. See “I/O Settings”.<br />
MIDI In/Out<br />
The MIDI input and output port can be assigned in your specific MIDI application.<br />
Connect the MIDI adapter cable that came with your 0202 Daughter card to the mini-<br />
DIN connectors on the card. The adapter cables convert the mini-DIN to standard DIN<br />
connectors used on most keyboards and synthesizers. Connect MIDI Out to the MIDI<br />
In port of your synthesizer and MIDI Out of your synth to MIDI In of the 0202<br />
Daughter Card.<br />
20 <strong>Creative</strong> Professional