Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.1 Surround Speaker Connections<br />
Left<br />
Front<br />
Left<br />
Rear<br />
In<br />
Out<br />
1L 1R 2L 2R<br />
1L 1R<br />
Sub-Woofer<br />
(with built-in power amps)<br />
2L 2R<br />
Center<br />
2L<br />
Phono<br />
2R<br />
3L 3R<br />
Gnd<br />
Out<br />
1 2<br />
MIDI Cable<br />
Front Rear Ctr/Sub<br />
The 1/8” stereo jacks make it easy to connect to powered surround sound speakers.<br />
Only three stereo cables are necessary with many speaker systems (see above). The 1/8”<br />
jacks duplicate the 1/4” outputs.<br />
You can connect the 1/8” stereo jacks to your surround speakers and connect the 1/4”<br />
outputs to your other gear for music creation. When you want to monitor in surround,<br />
simply open the 5.1 Session and turn on your surround speakers.<br />
The chart below shows how to connect the outputs for 5.1 surround sound playback.<br />
Multichannel WAVE to Surround Sound Speaker Channels<br />
(using the factory 5.1 DVD Playback Session)<br />
WAVE Strip Surround Channels 1/4” Outputs 1/8” Outputs<br />
E-DSP WAVE 1/2 Front Left/Front Right 1L = FL 1R = FR 1 (Tip = FL Ring = FR)<br />
E-DSP WAVE 3/4 Center/Subwoofer 3L = C 3R = Sub 3 (Tip = C Ring = Sub)<br />
E-DSP WAVE 5/6 Rear Left/Rear Right 2L = RL 2R = RR 2 (Tip = RL Ring = RR)<br />
E-DSP WAVE 7/8 Side Left/Side Right N/A N/A<br />
3<br />
48 VDC<br />
+ -<br />
EDI<br />
3 - PCI Card & Interfaces<br />
The MicroDock<br />
Right<br />
Front<br />
Right<br />
Rear<br />
E-MU PCI Digital Audio Systems 27
Change language