AR-M237 AR-M277 - Pitney Bowes Canada

4%
0%
4
5
6
Touch the [X] key.
X
Y
ZOOM
The [X] key is selected
(highlighted) by default,
so there is normally no
need to perform this step
(Go to step 5.).
If the [X] key is not
highlighted, perform this
step.
Use the reduction, enlargement, and
[ZOOM] keys ( / ) to change the
copy ratio in the horizontal (X)
direction.
A fixed ratio key will not
64%
50%
100
100
XY ZOOM
XY ZOOM CANCEL
Note
Touch the [Y] key.
X
Y
Y
1
2
4
become highlighted
when touched.
The [ZOOM] keys
( / ) can be used to
change the ratio in
increments of 1%
Touch the key to
increase the ratio, or the
key to decrease the
ratio. Continuing to touch
a [ZOOM] key ( / )
makes the ratio change
faster.
Touch a reduction or enlargement key to set
the approximate ratio, then touch the [ ]
key to decrease the ratio or the [ ] key to
increase the ratio.
ZOOM
ZOOM
50
100
100
Y
7
8
9
10
COPY FUNCTIONS
Use the reduction, enlargement, and
[ZOOM] keys ( / ) to change the
copy ratio in the vertical (Y) direction.
A fixed ratio key will not
77%
64%
50%
ZOOM CANCEL
129%
200%
400%
X
Y
ZOOM
Touch the [OK] key.
OK
100%
50
70
X
Y
become highlighted
when touched.
If you need to readjust
the horizontal ratio, touch
the [X] key again.
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
EXPOSURE
AUTO 8½x11
PAPER SELECT
X-50% Y-70%
E
PAP
If AUTO PAPER
SELECT is enabled, the
appropriate copy paper
size is automatically
selected based on the
original size and selected
copy ratios.
Select the number of copies and any
other desired copy settings, and then
press the [START] key ( ).
Note
To cancel this function, touch the [CANCEL]
key in the XY ZOOM screen.
33
2